Wrench size?

[grospaquet31]

hi,
I get a stupid question: what is the size of the wrench for the nut 10-32 (crank link assembly)?
I have a french size 10 but it does not match perfectly.
Thanks

 

[RudeDogg1]

It will be 10-32 of an inch you need imperial sized wrenches there won't be a metric exact match

 

[grospaquet31]

What i can see about wrench size is 1/2, 1/4, 3/8, 5/16, 7/16 etc

Which one I need for my 10-32 nut? If i understand you, this is the 5/16. Correct?

 

[Jay Walker]

Hi,

I'm short of time atm, but on the Williams flipper unit, the nut holding the link into the crank, and the nut clamping the crank onto the shaft of the flipper paddle, are both 3/8". Be careful with the second of these, it's quite soft metal, and over-tightening it can strip the internal thread.

 

[RudeDogg1]

Yes

 

[grospaquet31]

Thanks

 

[JT.]

It's going to be the 3/8th one like Jay said. 3/8" = 9.525mm. A 5/16th would be 21.16mm.