SteadyP
Site Supporter
Anyone had issues with their Ace in the hole bars firing up and down after finishing this multi ball? Just played a few games tonight and it occasionally seemed to have a mind of its own until my ball drained.
Pinball info
Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
WPT- Ace in the hole gate lock bars
- Thread starter SteadyP
- Start date
OP
OP
SteadyP
Site Supporter
Would it be worth while putting some Mylar around the sensors so it doesn’t trigger the gates when lights go off? Saw a thread on pinside about a similar issue. Also- it’s a cra* place on the playfield to get to- all of the red lights seem to be lit okay. Am I right I thinking they detect when the gates have been hit?
OP
OP
SteadyP
Site Supporter
Cleaned off some dirty marks around the Perspex on the upper playfield where the opto lights are and it’s working perfectly again....phew