ChrisFormela
Registered
Getting the mortgage forcing me to sell some of the stuff.
Virtual pinball, full size cab build from scratch based on WPC plans. Slightly wider backbox to accomodate 32" Samsung TV.
Most of the components were brand new. Except lockbar mount and rails. I've spend more time on building it that actually playing so pretty much few hours of une on everything. Still got monitor mount for the 43" Acer if someone ever wants to upgrade/change it use it as a free-standing monitor (cost me nearly £1000).
3 screens:
-43" ACER 4k monitor ET430K
-32" Backbox FullHD Samung TV
-panoramic 1280x360 LCD as a DMD screen
Sound:
-4 large exciters to emulate ball rolling over the playfield and some mechanical sounds
-2 JVC backbox speakers
-3 audio amplifiers
-10" subwoofer
DOF System:
-shaker
-8 massive contactors for bumpers and other knocking sounds and effects
-2 solenoids for flippers effect
-RGB buttons for flippers and magna - colors depending on the table
-5 Super bright RGB flashers
-2 beacons
-Leaf switches
-tilt Bob
-coindoor buttons
-analog plunger
-accelerometer
3 Seperate 5, 12, 24V PSUs (not counting PC PSU).
Whole setup run by PC with i5 7500 CPU, 16GB RAM, 512GB SSD, GTX 1080 (only used for few hours since new). Every table runs on 100FPS+
Pinscape with kl25z and pinshield + pinshield additional (power) board as a controller. Still plenty outputs to be used for future toys.
Genuine pinball door (brand new), new legs, new lockbar etc.
No idea where I've placed the BB hinges so not on at the moment but I'll install them before sale.
Currently running PinUP fronted with VisualPinball and Pinball FX3. DOF and all other stuff installed. Probably around 100 tables loaded but obviously few hundreds more available. I'm just not a fan of downloading everything just to make the number bigger and its a bit against the VP scene to sell the machine with all the tables.
No LED strips etc. as the idea was to make it as close to the real machine as possible but nothing stopping new owner from putting them as well as many other upgrades.
Let me know if you need any more information, videos or photos.
Price £4500
View attachment 20230607_145338.mp4
View attachment 20230607_151340.mp4
Virtual pinball, full size cab build from scratch based on WPC plans. Slightly wider backbox to accomodate 32" Samsung TV.
Most of the components were brand new. Except lockbar mount and rails. I've spend more time on building it that actually playing so pretty much few hours of une on everything. Still got monitor mount for the 43" Acer if someone ever wants to upgrade/change it use it as a free-standing monitor (cost me nearly £1000).
3 screens:
-43" ACER 4k monitor ET430K
-32" Backbox FullHD Samung TV
-panoramic 1280x360 LCD as a DMD screen
Sound:
-4 large exciters to emulate ball rolling over the playfield and some mechanical sounds
-2 JVC backbox speakers
-3 audio amplifiers
-10" subwoofer
DOF System:
-shaker
-8 massive contactors for bumpers and other knocking sounds and effects
-2 solenoids for flippers effect
-RGB buttons for flippers and magna - colors depending on the table
-5 Super bright RGB flashers
-2 beacons
-Leaf switches
-tilt Bob
-coindoor buttons
-analog plunger
-accelerometer
3 Seperate 5, 12, 24V PSUs (not counting PC PSU).
Whole setup run by PC with i5 7500 CPU, 16GB RAM, 512GB SSD, GTX 1080 (only used for few hours since new). Every table runs on 100FPS+
Pinscape with kl25z and pinshield + pinshield additional (power) board as a controller. Still plenty outputs to be used for future toys.
Genuine pinball door (brand new), new legs, new lockbar etc.
No idea where I've placed the BB hinges so not on at the moment but I'll install them before sale.
Currently running PinUP fronted with VisualPinball and Pinball FX3. DOF and all other stuff installed. Probably around 100 tables loaded but obviously few hundreds more available. I'm just not a fan of downloading everything just to make the number bigger and its a bit against the VP scene to sell the machine with all the tables.
No LED strips etc. as the idea was to make it as close to the real machine as possible but nothing stopping new owner from putting them as well as many other upgrades.
Let me know if you need any more information, videos or photos.
Price £4500
View attachment 20230607_145338.mp4
View attachment 20230607_151340.mp4
Last edited:
