What's new
By:
Pinball info

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

WPC-S Backbox Boards

SpiderPin

SpiderPin

Site Supporter
Joined
Jun 1, 2021
Messages
628
Location
London
Hi all - I just wanted to check what boards I'd need for an empty WPC-S backbox. I think these should do it:
www.pinball.co.uk

WPC-S CPU board A-17551 - Pinball Heaven

Replacement WPC S (security) CPU board for mid 1990’s Williams Bally pinball machines. Suitable for the following pinball machines : – World Cup Soccer – February 1994 – The Flintstones – July 1994 – Corvette – August 1994 – Red & Ted’s Road Show – October 1994 – The Shadow – November 1994 –...
www.pinball.co.uk www.pinball.co.uk
www.pinball.co.uk

Dot matrix control pcb - PinLED A-14039 - Pinball Heaven

Absolutely new development of the Dot Matrix Controller Board A-14039 / A-14039-1. Our PinLED Dot Matrix Controller Board is a replacement for defective original boards. The board has brand new innovations and has this two advantages: New Digital Section New Power Supply Section It is possible...
www.pinball.co.uk www.pinball.co.uk
pu-parts.com

Bally/Williams Fliptronic 1+2 Board #A-15472, #A-15028

Fliptronic 1+2 Board for several Bally/Williams WPC pinball games, reference #A-15472, #A-15028.
pu-parts.com pu-parts.com
pu-parts.com

WPC Power Driver Board #A-12697 for Bally/Williams

Power Driver Board for all Bally/Williams WPC pinball machines from 1990-1994 (except Bride of Pinbot and Funhouse), reference #A-12697.
pu-parts.com pu-parts.com
I can't find a Sound-board for sale - anyone got one? Or can I use pinsound instead? (Just found out how much pinsound is and I would like to avoid paying that...

Also I assume these don't come with cables - best place to sort those?
 
sound/display boards are always challenging and they are pricey when you find them.
 
Anyone who has got a Pinsound board will have the old sound board floating around somewhere in a box under their machine. There must be plenty of people here with Pinsound boards so there must be a few of the original boards around. I've got a spare WPC-95 sound board as I have a pinsound in my Roadshow, but that won't work in The Shadow afaik.
 
Dont forget with a WPC-S Cpu board , you also need the correct PIC security chip for the game. Its also nice to get one with the proper serial number in for the game to, though there is a way to use any pic chip also.

I may have some WPC and WPC-S boards , will have a look shortly
 
I started working on this page to track boards:

Replacement Boards Options

Working my way through issues with Tommy's DMD being fully lit and I keep finding more board horrors. I am trying to find out who is currently supplying boards and if they are considered to be good replacements. I have an XPin Power Supply Board coming as the original one looks like a horror...
www.pinballinfo.com www.pinballinfo.com
 
I have a pinled board in my BSD for display and it seems to be working well.
Also, if you are going for a newer LED display that is powered seperately, you won't need the HV on the display board, which again gives you second hand options.
I now have a infrared heat camera to try again to isolate what IC has actually gone on my original display board.
 
I may have an original cpu board (without game chips) available.
Not in best condition but will gusrantee it works.
 
I would say Tilt audio does have issues as the guy who makes them is a nightmare.

Seriously - just throw in a pinsound. It is rock solid - it works.

May have a soudboard but its the early wpc one. I guess you will be looking for a DCS board?

Dont forget your ribbon cable!
 
You must log in or register to reply here.
Back
Top Bottom