Seems like someone's fit a system 11 coindoor on a wpc machine so its missing the plate to press the interlock switches.
Anyone got a decent-ish one?
Anyone got a decent-ish one?
Pinball info
Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
Wanted WPC Coindoor Complete
- Thread starter Carl Spiby
- Start date
OP
OP
Still looking, don't need coin mechs, just a reasonably clean door with buttons.
The system 11 door is available as a PX or sale.
The system 11 door is available as a PX or sale.
The little plate spot-welded onto the door to operate the switch(es) didn't appear on u.k. spec until Twilight Zone (though I heard the last few Draculas also used it).
I altered the wiring of the power interlock when converting a Dutch-spec Indiana Jones PBA from an S10/DBV door to an Electronic Coin Acceptor door, which didn't have the plate. Luckily, it wasn't a game where the 'door closed' switch is essential, like Dr. Who or Johnny Mnemonic.
I altered the wiring of the power interlock when converting a Dutch-spec Indiana Jones PBA from an S10/DBV door to an Electronic Coin Acceptor door, which didn't have the plate. Luckily, it wasn't a game where the 'door closed' switch is essential, like Dr. Who or Johnny Mnemonic.
Last edited:
OP
OP
Its definitely a system 11 door, looks exactly the same as the one on Rollergames.
OP
OP
Still looking, had some interest in my System 11 door but obviously can't sell that until I have a replacement!
What's the difference Carl? I have a spare 3 slot coin door off my FH.
OP
OP
Interlock plate on the lower right looking from the back.
P
pintableuser
Hello,
I have bought non working machines where the interlock plate has been missing. It may help if you fabricate your own bent plate and install by drilling two holes on door edge IWO buttons and bolting in place. ..... Hope this helps.