Sold World Poker Tour £1400

[Matt Adams]

World Poker Tour, absolutely filthy, starts and plays a game but the 2 banks of drop targets to the left need new plungers and sleeves, the "combs" to lift them are present, shown in the photo with the manual.

Good....

• Working, starts a game flips balls around
• Manual and sealed goodie bag included

Bad....

• As above, the 2 banks of drop targets to the left need new plungers and sleeves, the "combs" to lift them are present
• DMD is fully working but burnt. I have a "bright" one with a line out you can have (included) if its any use.
• 30% of bulbs are out
• The dirtiest game you have ever come across!

That's it, mail me

 

[stoptap]

Great project for someone. New card decals for the drops and new upper playfield are available. Should clean up real nice.

Been playing mine tonight. Great game.

 

[ronnie63]

I have seen well dirtier!

 

[unity_neil]

I loved this when I got to play on Wayne's. Would this be too big a project for a relative newbie. I have restored a number of cars...

 

[windoesnot]

Someone buy this before I do something stupid!

 

[J.C.Rox]

I loved this when I got to play on Wayne's. Would this be too big a project for a relative newbie. I have restored a number of cars...

If you're into car restoring this should be a piece of p***. Newish so parts very easy to find and the collective forum will help advise on any tricky bits. This is also a really good pin at a very fair price so you won't lose dosh on it when it's fully restored...go for it!!

 

[Sgt GrizZ]

Ffs @Matt Adams, I'm supposed to be downsizing and you throw this into the temptation mix..... only down the road too. Aaagh.

Well your plan won't work, I'm not buying it :-D So there!

Sent from my C6603 using Tapatalk

 

[unity_neil]

Pmd you @Matt Adams thx

 

[steve brum]

not my cup of tea BUT a great buy for someone. never a fan of gambling pins apart from EM ones!

 

[stoptap]

I loved this when I got to play on Wayne's. Would this be too big a project for a relative newbie. I have restored a number of cars...

It will be a doddle. One of the easier games to strip. Like I said earlier it looks like you will need some drop target decals.

http://www.pinball.center/en/shop/p...oker-tour/7009/world-poker-tour-target-decals

And I should imagine a new upper playfield.

https://www.ebay.co.uk/itm/272259052768

Although I wouldn't buy anything until you see the actual machine (if you buy it) and give them a clean.

 

[windoesnot]

Phil Dixon made some new upper playfields a while back, very good quality too

 

[stoptap]

Phil Dixon made some new upper playfields a while back, very good quality too

If he still has some then that would be much better than my link.

 

[unity_neil]

Thanks for the support everyone

 

[windoesnot]

Pinside user flashinstinct made a batch of drop target and stand up target decals last year for WPT, if the ones on it are a bit manky may be worth asking him if he can do another set. There was 2 design sets made (1 as per the original and a new one I helped design), both of which looked great. Wayne & David got a set each and Paul Owen has my old WPT with the new design style on the targets

 

[stoptap]

Pinside user flashinstinct made a batch of drop target and stand up target decals last year for WPT, if the ones on it are a bit manky may be worth asking him if he can do another set. There was 2 design sets made (1 as per the original and a new one I helped design), both of which looked great. Wayne & David got a set each and Paul Owen has my old WPT with the new design style on the targets

I think they are the ones that Pinball Center sell. I believe they have two designs.

 

[windoesnot]

Didn't know they sold them but the designs are different to what we put together

 

[Wayne J]

Absolute bargain to whoever got it.
Following the complete strip down and rebuild of mine, I have a complete set of playfield plastics, drop target decals as well as upper playfield spare if required by the lucky purchaser.
PM if you want/need them.

 

[stoptap]

Thanks for the support everyone

When you do the shop job on it and clean/replace the upper playfield. I recommend you put some LED rings in the pop bumpers. It is quite dark up there and the rings really brighten it up.
I got mine from pinball-led.uk

 

[Matt Adams]

There are a set of new drop target decals as well as new sling shot plastics in the goodie bag

 

[unity_neil]

Wow that's a nice bonus. I'll take some good pictures and do a shop log for this I think

 

[unity_neil]

Thanks Andrew.

The led rings I got for my ss were from matt Adams.
They are great so hopefully I can get some similar ones.

When you do the shop job on it and clean/replace the upper playfield. I recommend you put some LED rings in the pop bumpers. It is quite dark up there and the rings really brighten it up.
I got mine from pinball-led.uk

View attachment 33189

 

[unity_neil]

This is the most fairly described pin ever sold I think. Everything is as described. Thanks @Matt Adams.

It really is filthy too

That said it's coming up very nicely with some cleaner and a microfiber!

 

[Matt Adams]

Thanks Neil, its always a worry when you describe a machine. That will clean up nicely though. I wish I had time to do it myself!