Here is a Demolition man up for grabs.
Yes - it does have playfield wear by flippers and does need a new set of plastics but these can be purchased from here:
www.pinball.center
www.pinball.center
Other suppliers are available......
The last one of these I sold was way too cheap! Of course this one also cost me more.
So the good points are:
All the electronics work (I believe!)
Swapped out about 30-40 lamps to LED.
Changed the AA batteries to a CR2032 with holder.
Good DMD
Good boards.
Cars are still there.
Comes with a manual.
Playfield lighting does work, but photos were taken prior to me changing a lot of lamps.
Bad points are:
Wear on playfield (link above for overlay)
Plastics are shocking
Left gun could do with a strip down and clean (does work but not as good as the right gun that I have already done)
GI, backbox and some insert lights need changing (to LED)
It is dirty - needs a strip down and rebuild.
The GI to backbox needs making off into the connector (instead of via connector blocks).
Legs should clean up okay but I would order new leg levellers/feet.
Knocker will have to be reconnected (currently runs to the coin meter in the cabinet) - I may do this if I get chance along with the GI connector but cant promise.
Game does play. Comes with a C220 coin mech that would need reprogramming to modern coinage.
I can not say it 100% works, may have the odd duff switch or target. Played quite a few test games during the day whilst I have been fixing faults.
Game located in my workshop, a couple of miles from Junction 6 M6 (B19 3LS post code) - I have keys to the building so can offer collection at unsociable hours. But please be aware, I do work outside of Birmingham.
Cash or bank transfer.
Martin can collect but I am waiting for him to collect another machine off me but he seems very busy.
If you want to collect my workshop is in the Birmingham CLEAN AIR ZONE - so please check your vehicle first as you may have to pay a charge.
www.gov.uk
Donation to forum will be made when payment is made.
Oh - and of course no warranty implied or given!
Yes - it does have playfield wear by flippers and does need a new set of plastics but these can be purchased from here:
Plastic Set for Demolition Man
www.pinball.center
Multiball Overlay for Demolition Man
www.pinball.center
Other suppliers are available......
The last one of these I sold was way too cheap! Of course this one also cost me more.
So the good points are:
All the electronics work (I believe!)
Swapped out about 30-40 lamps to LED.
Changed the AA batteries to a CR2032 with holder.
Good DMD
Good boards.
Cars are still there.
Comes with a manual.
Playfield lighting does work, but photos were taken prior to me changing a lot of lamps.
Bad points are:
Wear on playfield (link above for overlay)
Plastics are shocking
Left gun could do with a strip down and clean (does work but not as good as the right gun that I have already done)
GI, backbox and some insert lights need changing (to LED)
It is dirty - needs a strip down and rebuild.
The GI to backbox needs making off into the connector (instead of via connector blocks).
Legs should clean up okay but I would order new leg levellers/feet.
Knocker will have to be reconnected (currently runs to the coin meter in the cabinet) - I may do this if I get chance along with the GI connector but cant promise.
Game does play. Comes with a C220 coin mech that would need reprogramming to modern coinage.
I can not say it 100% works, may have the odd duff switch or target. Played quite a few test games during the day whilst I have been fixing faults.
Game located in my workshop, a couple of miles from Junction 6 M6 (B19 3LS post code) - I have keys to the building so can offer collection at unsociable hours. But please be aware, I do work outside of Birmingham.
Cash or bank transfer.
Martin can collect but I am waiting for him to collect another machine off me but he seems very busy.
If you want to collect my workshop is in the Birmingham CLEAN AIR ZONE - so please check your vehicle first as you may have to pay a charge.
Drive in a clean air zone
Find out if you need to pay to drive in a clean air zone and check your vehicle meets emission standards.
Donation to forum will be made when payment is made.
Oh - and of course no warranty implied or given!
Last edited:
