No Longer Available Williams Cyclone - £1800 - Collection West Sussex

[pinballtoys]

Williams Cyclone - Fully working

collection from WORTHING, West Sussex £1800

more dropbox photo's here

I've sorted ALL the electrical problems out and rerubbered

remaining issues are...
not safety playfield glass
leg levellers may need freeing up
speaker panel right hand side needs cleaning up
playfield inserts are all crazed

 

[russdx1]

How much is a CPU board these days?

 

[Banzaipinabll]

How much is a CPU board these days?

System 11b, Pinball had them but OOS. 340 ex VAT for new.

MPU Board For Williams System 11, 11A, 11B, 11C Machines

Replacement circuit boards for Bally Williams, Data East, Gottlieb Stern Sega pinball machines

www.pinballdisplays.co.uk

 

[paddythegreek]

I got a Wms 11b board spare BUT
Most times is comes straight on and runs the machine as it should. Occasionally it don’t come straight on and you have to switch off and switch on again. £200 inc UK post. Ken

 

[marcgatward]

I got a Wms 11b board spare BUT
Most times is comes straight on and runs the machine as it should. Occasionally it don’t come straight on and you have to switch off and switch on again. £200 inc UK post. Ken

Can I have the board please paddy my f14 one is shot

 

[paddythegreek]

Can I have the board please paddy my f14 one is shot

To be fair I’ve offered it first to whoever buys Cyclone. If they don’t want it then you got first refusal. But if there’s no takers on the machine by 10pm Wed 19th I’ll offer it to you. Ken

 

[Pick Holder]

F14 is sys11a
Cyclone is sys11b

An mpu would need modifying.

 

[paddythegreek]

I’d forgot 11b is missing the sound generator and other bits around it.
But I wasn’t aware F14 was 11a either.

 

[Pick Holder]

11c has no sound on it at all
11b has a part of the sound populated
11a has everything populated

 

[Beowulfz07]

11c has no sound on it at all
11b has a part of the sound populated
11a has everything populated

Now if I want onions then this is the guy I’d buy them from

 

[crsedgar]

My Banzai Run did the exact same thing and everytime I turned it off and on again it would boot up no issues, that continued with the next owner just if any prospective buyer had any concerns.

 

[pinballtoys]

found a working mpu board & game plays
still a project as needs new motor drive belt, playfield rubbers & cleaning and some electrical lighting issues to resolve
£1600

 

[pinballtoys]

I recently found the time to sort out the original issues with this game, I originally intended to just pass it on as a project

All electrical issues now resolved and playfield clean & rerubbered

see top post for current details and new photo's

cheers Bob