Just id'D fault with my FH that's up for sale. One minus button not working so has any one got assembly please? Cheers
Pinball info
Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
Found it! WILLIAMS / BALLY 4-BUTTON SERVICE / DIAGNOSTICS ASSEMBLY 5641-12724-00
- Thread starter Mozcom
- Start date
Same here. Ordered a replacement chassis and buttons from pinball center in Germany but you can get them here.
The reason I am replacing is that the original button looks to be threaded and missing the spring and button.
If you need just a button I can send one to you.
The reason I am replacing is that the original button looks to be threaded and missing the spring and button.
If you need just a button I can send one to you.
Attachments
OP
OP
Cheers. It's the one single red minus switch not just the button top if that's what you meant sorry. No contact being made so does not function. Think a working full assembly maybe quicker and easier?
As a quick fix Have you tried spraying a bit of switch cleaner in there? Worked with my Whirly
I had an issue on BSD I think, or could be going mad, where one of the points stopped working, get a multimeter and put it in continuity, aligator it up and press the button, you may find that another two points on the switch make continuity and you can just resolder the wires accordingly and it'll work...
Or I may be going mad.
It'll take 5 minutes to check though.
Or I may be going mad.
It'll take 5 minutes to check though.
OP
OP
thanks guys - tried but no joy - maybe an overnight soak may do the trick ?
I think @myPinballs sells them?
Yes I do. Sets of 4 £10. Don’t bother trying to clean a 25 year old switch!
OP
OP
Thanks all. The FH buyer has said they have some spare so not needed now.
