Which way round do these wires go? Haunted House / System 80

[Nigel Baker]

Er, if one had been enthusiastically pulling the power lead back into a Haunted House and found that said lead had come off in the process, which way round should it be re-wired. See photos.

Essentially, all I want to know is which way round the terminals are on the interference filter, if anyone knows off the top of their head.

 

[Dex-Jay]

As shown in lower picture
Of the 2 black wires shown, does the 1 have a raised rib? I've a feeling it maybe printed underneath the filter. I'm pretty sure the hot (brown or black) go on the right, white or blue to the left.

Anyone else confirm that?

 

[DAFlippers]

Green to Green and other two either way round.

David

 

[Nigel Baker]

I thought that might be the case. Just wanted to check.

 

[Moonraker]

This is how mine is wired. Not switched it on yet mind you..!

 

[Moonraker]

Which is probably just a well given yours is connected opposite to mine on the wires to the transformer side...