What tool do we need?

[VeeMonroe]

We need to unscrew the screw pictured. Can someone identify the screw/tool needed?

 

[Ashbo]

Draper 82406 Security Bit Set - Silver (33-Piece) https://amzn.eu/d/8VAGg4a

 

[kevlar]

It's Torx security. As above a set like that will cover it.

 

[VeeMonroe]

Thanks! Tool set ordered!

 

[johnwhitfield]

They are actually slightly more useful than you’d imagine. The same type of screws are in dishwashers and washing machines. It’s good to have a set around to justify pin ownership.

 

[drhex]

Also used on the screws holding the backbox locks in on Williams originally. The pin can be drilled out in a pinch.

 

[VeeMonroe]

Also used on the screws holding the backbox locks in on Williams originally. The pin can be drilled out in a pinch.

I drilled out four of the same screws on the blanking plate covering the Fish Topper hole. They were rusted in and I didn’t expect to use the blanking plate (which was also rusty) again either.

This is the casting trigger, so no drilling out.