What's new
By:
Pinball info

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

What legs for Williams Comet?

C

ChrisFormela

Registered
Joined
Jul 10, 2020
Messages
393
Location
Leicester
Recently got an obsession to match right legs for every of my machines. Got problem with finding right ones for my Comet. It currently stands on half ribbed 28.5" nut it's few inches taller than my system 11 machines in the line up. Leg holes in the cabinet are also lower than in the other machines. Is that normal?
 
Thanks. I've seen that post before. Looks like The Comet (1985) should come with flat chrome 27". Can anyone confirm?
 
I've removed the legs and there are 4 holes for the bolts.
Looks like the cabinet was prepared for 27" and 28.5" but I might be wrong. Manual says to put the legs in 1st and 3rd hole from the top, so I moved them. Looks like they were never installed properly.
Totally confusing...
 
I think you're on the right track, it's shown with flat chrome legs on the back of the flyer.
 
Just wonder what length. Both sources mention different lengths 28.5 and 27".
With 28.5 backbox is on the same level as system 11 but front of the cabinet is about an inch higher so Ill probably stick with it.
 
You must log in or register to reply here.
Back
Top Bottom