Hey peeps
I’ve just rebuilt all three flippers on whirlwind.
Now the right upper and lower are not just weak but almost non existent.
They move freely when you use you hands to move them. So it’s not mechanical.
I had hell n all trouble soldering the wires back on the lugs. Needed a welder to get the wire to take the solder. I’m wondering if I’ve damaged a coil?
It’s both flippers. I suspected the cabinet switch at first and although it’s old it was working fine before the rebuild.
Is there anything else which could cause both the flippers on the same switch to go weak?
Wired incorrectly?
Thanks
Gaz
I’ve just rebuilt all three flippers on whirlwind.
Now the right upper and lower are not just weak but almost non existent.
They move freely when you use you hands to move them. So it’s not mechanical.
I had hell n all trouble soldering the wires back on the lugs. Needed a welder to get the wire to take the solder. I’m wondering if I’ve damaged a coil?
It’s both flippers. I suspected the cabinet switch at first and although it’s old it was working fine before the rebuild.
Is there anything else which could cause both the flippers on the same switch to go weak?
Wired incorrectly?
Thanks
Gaz