What's new
By:
Pinball info

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

Found it! Wanted : Ubiquity UDM-SE

Paul

Paul

Staff member
10 Years
Joined
Oct 5, 2012
Messages
12,220
Location
South Wales
After just missing out on one of these on Ebay because i was too bloody tight to pay an extra £20 (Damn you "make an offer") and then others deciding they would pay the full asking price (which to be fair was already a good deal)...
So turning to the Forum collective who combined must have their fingers in multiple pies.... Wondered if anyone had a good source for the Ubiquity UDM-SE at all, or has one they dont use any more?

Home Wifi giving me grief, it's 5 years old and Mesh (and cheap!) so figured i would throw one of these in along with a couple of wifi6 LR AP's connected via POE and have done with it - It Hopefully should do me for the next couple of years or so and by then the Wifi 7 AP's will have dropped in price....

Needs to be the SE, or maybe the pro with a separate POE switch... however collectively these would probably come to more than the SE (and i like the idea of it being all in one and not having to deal with the power drain of a second unit)

Any good leads welcomed... Thanks!
 
Take a Cloudkey plus existing switch and one of their gateways. More flexible and works really well. Are you racking this?
 
drhex said:
Take a Cloudkey plus existing switch and one of their gateways. More flexible and works really well. Are you racking this?
Click to expand...
Oops... had forgotten i put this here!

Ended up picking one up new... Along with a NOS U6-LR AP. So here's an interesting thing - I'm replacing a 3-node Mesh system in the house. New AP top of the stairs. Rack in the loft with a few things in it. Put this alongside, directly feeding the AP using POE+. Signal is stronger ALL over the house with just the one AP.
Also as my interweb (FTTP) can go directly into the UDM this means i have ripped out the dodgy Fritzbox along with the old Wifi network nodes.

I Have re-created those old wifi networks temporarilly on the AP before i create new separate Vlans and segment them all off... Separate Guest network with Web only access, Same with IoT, Internal network Is already created, and i think i will add a Camera interface too, which will be PoE directly into the box and using "protect" which is built in.
 
Protect is good with UI cameras, dodgy with others. I have an all UI system with eight APs here (don‘t ask).
 
You must log in or register to reply here.
Back
Top Bottom