Found it! Wanted: Bram Stoker's Dracula or simular

[s000m]

Been watching Bram Stoker's Dracula and after seeing the game in action I would like to add it into my collection.

Not fussed on condition as I don't mind a project. Of course if it's in great condition that works too!

Will consider simular pins!

 

[s000m]

Managed to find one outside of the forum. WIll put up some pics when it arrives!

 

[s000m]

 

[crsedgar]

Great choice! Is the DMD panel missing the red filter it looks orange but may be just the video?

 

[s000m]

Great choice! Is the DMD panel missing the red filter it looks orange but may be just the video?

Likely the YouTube compression, its very red.

I did look at the color DMD option but the animations somehow don't look as good. I'm sticking with the red.

 

[Matt Vince]

Great choice! Is the DMD panel missing the red filter it looks orange but may be just the video?

It's just the video, it is there.

 

[M4carp]

The only game I regret selling because nobody else got on with it, enjoy
Very creepy late at night in the dark especially with pinsound.

 

[russdx1]

Original sound track is best part of that game

 

[Andy Hancock]

Original sound track is best part of that game

I've still got yours Russ . Had a game tonight and said to myself never to sell it . Then again we've all said that before but it does have something different about it

 

[russdx1]

I've still got yours Russ . Had a game tonight and said to myself never to sell it . Then again we've all said that before but it does have something different about it

Yeah it's one of the games you just gotta own for a little while to appreciate it. My boys loved it more then i did hehe.

 

[marcoos_1]

Yeah it's one of the games you just gotta own for a little while to appreciate it. My boys loved it more then i did hehe.

Being pretty new to this I asked the forum for a recommendation on the best horror themed pin. BSD was a firm favourite. Taking the advice I found a really nice one and I love it.

Sounds daft to say but it actually is quite scary at night when you get the games room lights down (or maybe that's just the beer blade taking effect!).

Mine is pretty stock and I'm not a big modder - but I did see some nice metal flame effect lanterns for the gravestone and a floodlight for the graveyard which looked pretty good. I might also try some side blades - but it does look pretty tight in there between playfield and cabinet.

Can anyone recommend any good mods for this? (sorry - not wanting to hi-jack thread)

 

[russdx1]

Being pretty new to this I asked the forum for a recommendation on the best horror themed pin. BSD was a firm favourite. Taking the advice I found a really nice one and I love it.

Sounds daft to say but it actually is quite scary at night when you get the games room lights down (or maybe that's just the beer blade taking effect!).

Mine is pretty stock and I'm not a big modder - but I did see some nice metal flame effect lanterns for the gravestone and a floodlight for the graveyard which looked pretty good. I might also try some side blades - but it does look pretty tight in there between playfield and cabinet.

Can anyone recommend any good mods for this? (sorry - not wanting to hi-jack thread)

The after market 3D printed tomb stone is a MUST, its a 100% better then the original one! I am not a fan of LED's in any 90s pin but this one really does look quite cool all in blue/purple as just matches the blue theme very well. Some of the GI is a right pain to get to though!

 

[Rob zombie]

I've kept mine stock except for LED lightning strip over the graveyard and under cab LED. It would be criminal to put LED's in it. It should be played in the dead of the night by candlelight.

Best game ever!

 

[Ped]

Being pretty new to this I asked the forum for a recommendation on the best horror themed pin. BSD was a firm favourite. Taking the advice I found a really nice one and I love it.

Sounds daft to say but it actually is quite scary at night when you get the games room lights down (or maybe that's just the beer blade taking effect!).

Mine is pretty stock and I'm not a big modder - but I did see some nice metal flame effect lanterns for the gravestone and a floodlight for the graveyard which looked pretty good. I might also try some side blades - but it does look pretty tight in there between playfield and cabinet.

Can anyone recommend any good mods for this? (sorry - not wanting to hi-jack thread)

Said it before on another thread but I think Pinsound is an awesome mod for BSD. Someone took a lot of care to use original sounds and callouts from the movie and it makes it much more atmospheric imo

 

[Matt Vince]

Being pretty new to this I asked the forum for a recommendation on the best horror themed pin. BSD was a firm favourite. Taking the advice I found a really nice one and I love it.

Sounds daft to say but it actually is quite scary at night when you get the games room lights down (or maybe that's just the beer blade taking effect!).

Mine is pretty stock and I'm not a big modder - but I did see some nice metal flame effect lanterns for the gravestone and a floodlight for the graveyard which looked pretty good. I might also try some side blades - but it does look pretty tight in there between playfield and cabinet.

Can anyone recommend any good mods for this? (sorry - not wanting to hi-jack thread)

The coffin mod to remove Ron Jeremy is one I would recommend!

 

[M4carp]

The coffin mod to remove Ron Jeremy is one I would recommend!

But there‘s a proper stiffy in that coffin
I had the fancy coffin mod on mine with the flaming torch each side for the lit locks and it does look good.
But if I ever get another it will be with Ron as it does make me laugh.

 

[crsedgar]

The coffin mod to remove Ron Jeremy is one I would recommend!

If a BSD owner wants to loan me their coffin sculpt I could make a mould from it and @RudeDogg1 on paint?

But only after competing the Judge Dredd topper.

 

[replicas]

 

[s000m]

I really want to redecal my machine but unfortunately everyone seems to on a 4 - 6 month waiting list. Dare I do it myself?

 

[Drew.m]

I really want to redecal my machine but unfortunately everyone seems to on a 4 - 6 month waiting list. Dare I do it myself?

Go for it, its not as difficult as you think,

 

[Ant-H]

I really want to redecal my machine but unfortunately everyone seems to on a 4 - 6 month waiting list. Dare I do it myself?

Go for it. It’s not as hard as you would think. Just take your time with the prep work and get that looking good then the. finished results when the decals are applied will look spot on

 

[Mfresh]

Do it Scott. Sanding is very relaxing, and once the cab is prepped then applying the decals is really easy. All you need is a helper to lower the decal onto the wood while you smooth it down.

 

[David_Vi]

Don't you have to empty the cabinet when you redecal? That's the bit that scares me!

 

[PinIB]

I really want to redecal my machine but unfortunately everyone seems to on a 4 - 6 month waiting list. Dare I do it myself?

I went with Rad Cals. Some kids had coloured the white bits on my original decals with red felt tip and it sent my OCD into overdrive.

 

[crsedgar]

Don't you have to empty the cabinet when you redecal? That's the bit that scares me!

Playfield out for sure and remove the boards from the backbox. I don't spay all the inside just the sides as it was originally done so transformer and wiring can stay.

It's a lot of work but such a rewarding task when it all comes together at the end, if you have the patience you'll be fine.

 

[s000m]

I went with Rad Cals. Some kids had coloured the white bits on my original decals with red felt tip and it sent my OCD into overdrive.

Thats exactly what mine looks like!

 

[marcoos_1]

That coffin mod is a cracker @replicas. Ive been researching it on pinside to try and order one, but the guy that makes them seems to be getting some really bad press for deliveries and it was a while ago. If there is a way of making them then I am up for one or helping out if I can.

I now have the CAD model and 3D print files for the tombstone mod/cover, which was very generously sent to me by a pinsider. However, Ive been messing about all day with my Anycubic i3 printer and its just not playing ball. Any experts on here?

 

[paulg100]

how big is it? you want me to resin print it?

still on a bit of a honey moon period with a printer i have at work so dont mind running it though if it will fit.

fdm wise have a prusa i3 so cant help specifically with the anycubic unless its more a universal fdm issue??

am resin printing as much as poss these days, looks so much better than FDM. just really messy so keep the resin printers at work.
own a dental lab and more and more stuff is 3d printed now days so printers are running most days.

 

[Pie Man]

I really want to redecal my machine but unfortunately everyone seems to on a 4 - 6 month waiting list. Dare I do it myself?

I did mine ( first time ) theres different methods but I went with the dry method.
Make sure you get rid of any imperfections on the cabinet before you apply the decals.

 

[replicas]

That coffin mod is a cracker @replicas. Ive been researching it on pinside to try and order one, but the guy that makes them seems to be getting some really bad press for deliveries and it was a while ago. If there is a way of making them then I am up for one or helping out if I can.

I now have the CAD model and 3D print files for the tombstone mod/cover, which was very generously sent to me by a pinsider. However, Ive been messing about all day with my Anycubic i3 printer and its just not playing ball. Any experts on here?

Person to talk to on the coffin mod is @RudeDogg1 , he did all the paint jobs on the above pics I posted. He might be able to help.
If anyone does get to print the headstone I'd be up for buying one for my machine. I still need to install the torches on mine that I've had for a couple of years now.