Having purchased some sheets of PDI glass, I am having difficulty getting them into 2 of my machines the Simpsons Pinball Party & Elvis as I get it to about an inch and a half from in when the glass becomes so tight I dare not push it home as it would never come out again.
My question is how best to 'open up' the Stern glass slide rails on these 2 machines, it appears to be the back part by the backbox that is tight, I don't want to damage the rails as such thought I'd ask if its a matter of opening up the gap where the glass sits or do I have to bend them out a bit?
Cheers
My question is how best to 'open up' the Stern glass slide rails on these 2 machines, it appears to be the back part by the backbox that is tight, I don't want to damage the rails as such thought I'd ask if its a matter of opening up the gap where the glass sits or do I have to bend them out a bit?
Cheers