Paul Staff member Joined Oct 5, 2012 Messages 11,618 Location South Wales Alias Toibs May 9, 2014 #1 Guys, looking for a lock and mechanism that roughly resembles this... Anyone got anything kicking about similar that might fit???? It has two locating pins not far off the middle hole... Cheers Paul
Guys, looking for a lock and mechanism that roughly resembles this... Anyone got anything kicking about similar that might fit???? It has two locating pins not far off the middle hole... Cheers Paul
Steve C Registered Joined Jul 7, 2012 Messages 1,803 Location The East Shire Of York May 9, 2014 #2 Lots of vending machines around so you should be able to prise one off a machine somewhere
RudeDogg1 Registered Joined Dec 27, 2012 Messages 8,515 Location Barnstaple, Devon May 9, 2014 #3 Any luck on eBay?
OP OP Paul Staff member Joined Oct 5, 2012 Messages 11,618 Location South Wales Alias Toibs May 9, 2014 #4 nahh - nothing that i can find...
Steve C Registered Joined Jul 7, 2012 Messages 1,803 Location The East Shire Of York May 10, 2014 #5 Could you not just put a flat plate over it and then drill the centre out and then fit a barrel lock?
Could you not just put a flat plate over it and then drill the centre out and then fit a barrel lock?
RudeDogg1 Registered Joined Dec 27, 2012 Messages 8,515 Location Barnstaple, Devon May 10, 2014 #6 Are any of these any good? http://onestop-locks.com/vending-ma...3.html?zenid=f38d320f4910b98b164a9365e5995355
Are any of these any good? http://onestop-locks.com/vending-ma...3.html?zenid=f38d320f4910b98b164a9365e5995355