Folks had a small problem with my TZ not ejecting balls into the trough. They would sit there in the hole and the solenoid would try to clear it but fail. Now this machine is in my garage and I cannot take the glass off completely without moving some junk around and a car..don't ask..I will have time to do this tonight so may give it a go. Now I managed to get my hand in and remove the two balls, and then used the plunger in the hope of getting all the balls back. However when I turn it on it cannot locate any of the balls. i've tried ejecting balls from the solenoid menu. No joy.
Found this fix on the web
if you have the home roms. go to test and the last one in test will
empty balls. If you don't have test. do a gumball machine test and
unload them all. then use a magnet or kickout test to remove them from
the tray.
Any ideas?
Found this fix on the web
if you have the home roms. go to test and the last one in test will
empty balls. If you don't have test. do a gumball machine test and
unload them all. then use a magnet or kickout test to remove them from
the tray.
Any ideas?