I am selling my TRON Pro pinball machine which is home use only but due to my OCD when I bought it from the original purchaser I did the following even though it wasn't required (can't help myself!):
I am asking £4400.00 for the machine.
- Completely stripped playfield
- Cleaned all plastics, ramps, posts etc etc just in case (even though they were already clean - I need help)!
- Waxed the playfield with three coats of carnauba wax (was going to treasure cove polish it but it already has a perfect deep finish so didn't need to)
- Added full set of new (white) rubbers
- At the same time as the playfield strip I fitted the following mods:
- Eli ramp mod kit - this is the $400.00 kit which piggy backs onto the main driver board and provides different colours depending on the mode being played - exactly the same as the LE version - details can be seen here: http://www.pinbits.com/index.php?main_page=product_info&products_id=566
- Hallmark illuminated light cycles - I modded these (not by gluing the button down but by taking them apart) so they are permanently lit when the machine is in
- Pinbits coloured plastic enhancement set - this is a set of orange and blue plastics which sit under the main plastics to protect them and also to provide a coloured glow around the plastics - there is additional exposed plastic over the in/out lanes and arcade - details can be seen here: http://www.pinbits.com/index.php?main_page=product_info&cPath=13_65&products_id=532
- I also created an LED mod for the Recognizer so it flashes orange when the targets in front of it are hit.
I am asking £4400.00 for the machine.
