Sold Transformers Pro

[Renvil]

Hey everyone.

I hope everyone that went to pinfest had a great time.

After playing all those machines, it’s time for a swap. I only have space for one pin so it’s one in and one out

The good:
Cabinet is in great shape with no chunks missing and the artwork is in near perfect condition apart from a bit of crumpling around the legs and shooter. Never had a door lock bar so an unmolested front panel too.
Playfield is in good condition with no major wear
Plays brilliantly. Fast and flowing (if you can hit the ramps consistently)
Colour DMD is perfect with no dead pixels.
FULL set of replacement plastics. These cost me £250 once shipped and imported.
Multi ball is a blast and Megatron holds the 4 balls before shooting them out at Mach 9
blade art installed
Nice transformers topper

The not so good:
Wear on the shooter lane
Missing backbox fluorescent tube and the right hand side tube holder needs replacing. I’ve tried with good working parts from a friends machine and the ballast is fine as it fired up no problem

As per updated pictures, I have sorted the backbox lighting.

The requires attention bit…
The reason I bought the plastics is that there is (pictured) a broken part next to the right ramp and the Camero. It’s held together but needs rolled rivets to fix properly.
The allspark cube also needs replacing (parts supplied) but again needs rolled riveting

I have managed to source a riveting tool and made repairs to the above plastics mentioned.
Added pics to show.

Please ask any questions and happy to take more detailed pictures of anything you might want to see.

Up at £3900 which by todays prices to me seems pretty reasonable considering the full set of plastics and colour DMD.
Will also consider a trade for Spider-Man or POTC + a bit of cash.

See it in action here:

 

[Renvil]

Updated with some new pictures after fixing the plastics and backbox lighting.