What's new
Pinball info

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

Sold The Addams Family (TAF) £3800

Pick Holder

Site Supporter
Joined
Jul 18, 2016
Messages
5,291
Location
Bournville, Birmingham.
Here is a players condition Addams family. Could do with it out the way swiftly. If you are expecting a minter then I would 'go back' now..... :)

European game, not the greatest cabinet. Has had some repairs.

But the good bits are I have just checked all the coils etc and they all work. I would say its 80% LEDed.

I have a 2 slot 'stern' coin door I will gladly throw in.

Ideal game for a full restoration, or simply play it but could do with a clean. I must admit I have not done much to it apart from change some GI connectors and pins. Sold as seen without warranty.

Board set looks really nice. The only repairs on the PD board are the new GI pins I fitted and two rectifiers changed. Also have reflowed some joints that weren't looking good. Remote battery box installed.

Also going on eBay as its £1 listing day.

This is not the one wth the 'cut loom' that was sold the other week.....

CASH ON COLLECTION PREFERED ON THIS FROM BIRMINGHAM B30 AREA.
BANK TRANSFER WOULD ALSO BE OKAY.
MARTIN COLLECTION ALSO FINE BUT WOULD PREFER YOU TO COME IN PERSON.

Trade? Maybe? Depends.....

Here are some photos.

IMG_9593.jpgIMG_9594.jpg

IMG_9595.jpg

IMG_9596.jpgIMG_9597.jpg
IMG_9598.jpg
IMG_9599.jpgIMG_9600.jpgIMG_9601.jpg

IMG_9602.jpgIMG_9603.jpgIMG_9604.jpg

IMG_9605.jpgIMG_9607.jpgIMG_9608.jpg

IMG_9609.jpgIMG_9610.jpg

IMG_9611.jpgIMG_9612.jpg

IMG_9613.jpgIMG_9617.jpgIMG_9618.jpgIMG_9619.jpg

IMG_9624.jpgIMG_9625.jpgIMG_9626.jpg

IMG_9627.jpgIMG_9628.jpg
IMG_9629.jpgIMG_9630.jpg
 
Last edited:
Been asked a few questions, so I will put the answers up:

This is not the one that Phil Palmer sold with the jointed wiring loom.
Everything works and no start up errors.
I have noticed a couple of lamps out (3 GIs and one flasher) - I will be sorting these Tuesday night.
Game fully plays.
Absolutely no acid damage on CPU board.

Thanks for looking all.
 
Back
Top Bottom