Noticed the switch wasn't working. I looked on the underside of the table and it was loose. I found one screw but I'm missing the other. Anyone any idea where to get one?
One single damn screw....
One single damn screw....
Pinball info
Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
Terminator 2 - Switch #77
- Thread starter Big Phil
- Start date
The legend sells them, I buy in bulk since a lost screw ended up with a switch coming into contact with a coil and blowing a chip on the main board. :frusty:
OP
OP
My machine is being collected on Thursday for the Scottish Meet. Will there be anyone going that could replace the screw so it's fully operational for the event?
Cheap ass tip of the day #1 
You can usually 'borrow' one from somewhere else under the bonnet. Lots of things under there can happily live with one less screw securing them
You can usually 'borrow' one from somewhere else under the bonnet. Lots of things under there can happily live with one less screw securing them
I will be bringing plenty of spares including the small Cherry switch screws.
Ask for Darren at the NBA compertition desk.
D.
OP
OP
I won't be there. Just my machines 
If I get chance I will sort it , if not I will put what you need inside the machine.
OP
OP
That would be great. Cheers man! It also has a nut on the end.
I've tightened the one screw and nut that's left so it's firm and in position so currently working.
I've tightened the one screw and nut that's left so it's firm and in position so currently working.