I need to thin the herd out so here's the first of the games on my chopping block:
Looking for £4250 or a trade. Cash +/- depending on what you have .
For those in the know it was purchased from the infamous angry farmer.
Being kind. It’s a T2 and it plays. Playfield is actually in pretty decent shape. The main board has been replaced with a new one from PH as the original had dreadful battery acid damage. Fitted with the profanity ROMs.
DMD is strong with no lines out.
Cabinet is tatty.
For some reason there is a star sticker stuck over where the centre post would be. I’ve never lifted it so don’t know if it is to hide wear or just because that is where the screw hole is.
Translight is in reasonable shape.
Bottom of the cab feels spongy, so probably was stored in damp at some time
If you are of a nervous disposition you probably won’t want to check the board work out. Clearly waving a soldering iron around with their eyes closed was easier than replacing connectors.
It DOES fully work but it wouldn’t advise buying this as your first machine. I strongly suspect that by the time it arrives all the pins will need to be re-seated in order to get it to work after transportation. It is 100% a players machine and not some show piece.
Photos to follow below shortly:
Looking for £4250 or a trade. Cash +/- depending on what you have .
For those in the know it was purchased from the infamous angry farmer.
Being kind. It’s a T2 and it plays. Playfield is actually in pretty decent shape. The main board has been replaced with a new one from PH as the original had dreadful battery acid damage. Fitted with the profanity ROMs.
DMD is strong with no lines out.
Cabinet is tatty.
For some reason there is a star sticker stuck over where the centre post would be. I’ve never lifted it so don’t know if it is to hide wear or just because that is where the screw hole is.
Translight is in reasonable shape.
Bottom of the cab feels spongy, so probably was stored in damp at some time
If you are of a nervous disposition you probably won’t want to check the board work out. Clearly waving a soldering iron around with their eyes closed was easier than replacing connectors.
It DOES fully work but it wouldn’t advise buying this as your first machine. I strongly suspect that by the time it arrives all the pins will need to be re-seated in order to get it to work after transportation. It is 100% a players machine and not some show piece.
Photos to follow below shortly: