Taf sound issue?

[ronnie63]

I fitted a flipper rebuild kit to all 4 flippers on a TAF. It had not been used for a few months prior due to a waak flipper, But now the sound comes and goes completey! I don't think it's related? Tried the usual stuff ribbon reseat and sound board connectors but still it persists, a reset brings the sound back for a time but seems longer machine is powered the worse it gets? Not had a chance to check voltages as the pin is not with me and not something I have seen before! Anyone have any idea what the issue might be?

Thanks Ronnie

 

[drhex]

Hi Ronnie,
should not be related. Measure voltages first and we can take it from there. You can always send it to me ;-)...

 

[ronnie63]

Hi Ronnie,
should not be related. Measure voltages first and we can take it from there. You can always send it to me ;-)...

Cheers for that lol, I do happen to have a spare sound board, surely it will just be the 12v would need checking? I won’t be at it until later next week

Thanks Ronnie

 

[drhex]

+-12 and 5V

 

[ronnie63]

+-12 and 5V

Oh yeah logic right enough