What's new
Pinball info

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

Found it! Table glass

Sgc1

Registered
Joined
Jun 23, 2016
Messages
53
Location
Wigan
Looking for table glass for standard table round Manchester if any one could help please.
 
@philpalmer doesnt send the glass - you have to go to his and collect as it says on the link.

It is a funny thickness to get at most glaziers (who can cut, harden and polush edges no problem) as its imperial thickness. So its probably a better idea to get the proper stuff.
 
@philpalmer doesnt send the glass - you have to go to his and collect as it says on the link.

It is a funny thickness to get at most glaziers (who can cut, harden and polush edges no problem) as its imperial thickness. So its probably a better idea to get the proper stuff.

Yep, its either slightly loose or slightly tight when converting to metric. Not a problem for modern sterns if its slightly tighter however as it stops a lot of the rattle from shaker motors.

@philpalmer I was sure I bought some glass from you years ago, arrived fine no problem. Did you start getting breakages?
 
Dont really remember ever posting glass, sounds like a stupid thing to do....
 
Back
Top Bottom