What's new
Pinball info

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

T - moulding

PAX

Site Supporter
Joined
Dec 28, 2020
Messages
1,025
Location
Thetford
Looking to bling up my Maiden with some red T moulding.
So, how easy is it to do (remove existing and fit new)
And
Where can you purchase said item?
Cheers
 
Believe it or not mate t-moulding.com. 🤣. I got some for my ice cold beer.!dead simple to do. If you look on YouTube there’s plenty of guides.
 
Pretty easy although I'd recommend taking the backbox off (not hard on spike games).

I got it off ebay, "T-Molding - 23ft Roll 3/4 Inch - 19mm" was enough for a backbox with a bit of spare.
 
  • Like
Reactions: PAX
Arcade world have a decent selection of colours, never thought of taking the backbox off, did mine in situ.
 
I think it just pulls out and you cut to size and push in, I have some to fit. I pulled mine out a little and pushed it back in to test.
 
  • Like
Reactions: PAX
needs a bit of a good push to get it in, a rubber mallet wrapped in a towel works good
Thanks useful to know when I get round to putting mine in. I doing it last hopefully so not to lift the playfield for a while
 
a chimpanzee and two trainees could do it.

 
a chimpanzee and two trainees could do it.


That's a damned pity, no chimpanzees in Suffolk only carrot crunchers 😉
 
Back
Top Bottom