System 11 Drop Target Repair

[DRD]

The plastic rest shelf on this 3 bank has previously failed and been repaired. Loose rivets were glued. It is cracked around the first rivet hole so drags and does not drop cleanly.



I could drill it out, re-glue and do a tidier job

I could replace the 3 was plastic ledge with 3x singles by drilling and riveting the frame accordingly

Make another one by filing down a bar of nylon ?

Any suggestions pls ?

 

[Sgt GrizZ]

The plastic rest shelf on this 3 bank has previously failed and been repaired. Loose rivets were glued. It is cracked around the first rivet hole so drags and does not drop cleanly.

View attachment 161718View attachment 161719

I could drill it out, re-glue and do a tidier job

I could replace the 3 was plastic ledge with 3x singles by drilling and riveting the frame accordingly

Make another one by filing down a bar of nylon ?

Any suggestions pls ?

You can get replacement one for the likes of Judge Dredd. I wonder if it could be tweaked to fit. The design didn’t change much.

 

[strobey]

Nylon and rivets sounds like a good fix. Would last forever and probably wouldn't take long to fab