Jib
Site Supporter
£7600
- 1641 lifetime plays (will continue to increase)
- UV Kit
- Stern side armour
- Flipper Fidelity backbox speakers
- Flipper Fidelity 10" sub
- Doug's speaker lights
- Mirror blades
- Real knocker
- Metal apron
- 2 stern light boards to illuminate apron windows as on a premium
- Apron art cover
- Speaker panel art cover
- Dice shooter rod
- 4 purple flasher domes
- Red start button that glows purple
- Clear drop targets
- Illuminated flipper buttons (these are included and working (see photo) but I put the factory buttons back on as I didn't like how they felt)
- Cliffy protectors fitted to shooter lane and outhole to trough
- Cliffy protector for drop targets (I've taken this off as it changed how the ball travelled in that area but will include it)
- Coloured insert gels on Burn it Back, 2x Scoring, 2x Multiplier
- Col's plastic protectors
- Titan UV glow rubbers (I missed 1 right at the back so that one is still factory rubber)
- Backbox ID plate frame thingy
Things to be aware of (see photos)
- Centre shot sometimes double registers
- The demogorgon ramp has a couple of dents on the edge, it doesn't affect ball travel
- The decal under the left ramp is damaged. This is a common problem due to the metal ball guide that sits under it
- The back of the cab has a few scratches from transport
- The majority of inserts have some ghosting
- Mirror blades do have a couple of dings
- Drop target springs shortened to stop bricks on hard shots
- Small scuff to corner of backbox decal
- Glass has a couple of small scratches
- Lockdown bar has a few surface scratches
Possible projector capability
From my understanding Stranger Things CPU's were flashed differently between the Pros and the prem/LEs to stop pro owners adding a projector. For whatever reason this pro machine seems to have a prem/LE CPU. I make absolutely no guarantees this means anything and take no responsibility if you try this and it messes up! However, I believe this means you could possibly add a projector to this machine but please do your own research. I ran the premium code and added a monitor and I was able to get the images that the projector uses to show on the monitor (see photo) usually on a pro machine you will not get anything showing on a monitor even if you run prem code. If you have no interest in doing this it has absolutely no affect on the machine playing on pro code. I've played on pro code the entire time I've had it except to test the monitor and it has no negative effects.
If you'd like any more details or photos let me know. Martin's been here several times.
- 1641 lifetime plays (will continue to increase)
- UV Kit
- Stern side armour
- Flipper Fidelity backbox speakers
- Flipper Fidelity 10" sub
- Doug's speaker lights
- Mirror blades
- Real knocker
- Metal apron
- 2 stern light boards to illuminate apron windows as on a premium
- Apron art cover
- Speaker panel art cover
- Dice shooter rod
- 4 purple flasher domes
- Red start button that glows purple
- Clear drop targets
- Illuminated flipper buttons (these are included and working (see photo) but I put the factory buttons back on as I didn't like how they felt)
- Cliffy protectors fitted to shooter lane and outhole to trough
- Cliffy protector for drop targets (I've taken this off as it changed how the ball travelled in that area but will include it)
- Coloured insert gels on Burn it Back, 2x Scoring, 2x Multiplier
- Col's plastic protectors
- Titan UV glow rubbers (I missed 1 right at the back so that one is still factory rubber)
- Backbox ID plate frame thingy
Things to be aware of (see photos)
- Centre shot sometimes double registers
- The demogorgon ramp has a couple of dents on the edge, it doesn't affect ball travel
- The decal under the left ramp is damaged. This is a common problem due to the metal ball guide that sits under it
- The back of the cab has a few scratches from transport
- The majority of inserts have some ghosting
- Mirror blades do have a couple of dings
- Drop target springs shortened to stop bricks on hard shots
- Small scuff to corner of backbox decal
- Glass has a couple of small scratches
- Lockdown bar has a few surface scratches
Possible projector capability
From my understanding Stranger Things CPU's were flashed differently between the Pros and the prem/LEs to stop pro owners adding a projector. For whatever reason this pro machine seems to have a prem/LE CPU. I make absolutely no guarantees this means anything and take no responsibility if you try this and it messes up! However, I believe this means you could possibly add a projector to this machine but please do your own research. I ran the premium code and added a monitor and I was able to get the images that the projector uses to show on the monitor (see photo) usually on a pro machine you will not get anything showing on a monitor even if you run prem code. If you have no interest in doing this it has absolutely no affect on the machine playing on pro code. I've played on pro code the entire time I've had it except to test the monitor and it has no negative effects.
If you'd like any more details or photos let me know. Martin's been here several times.
Attachments
-
1.jpeg166.2 KB · Views: 351
-
13.jpeg287.4 KB · Views: 342
-
14.jpeg322.9 KB · Views: 313
-
15.jpeg291.7 KB · Views: 303
-
16.jpeg196 KB · Views: 308
-
17.jpeg206 KB · Views: 295
-
18.jpeg154.8 KB · Views: 291
-
19.jpeg161.4 KB · Views: 284
-
20.jpeg261.4 KB · Views: 301
-
21.jpeg159 KB · Views: 293
-
12.jpeg280.2 KB · Views: 281
-
11.jpeg202.1 KB · Views: 275
-
2.jpeg174.8 KB · Views: 267
-
3.jpeg216.6 KB · Views: 267
-
4.jpeg260.1 KB · Views: 242
-
5.jpeg257.8 KB · Views: 237
-
6.jpeg110.5 KB · Views: 222
-
7.jpeg107.9 KB · Views: 223
-
8.jpeg220 KB · Views: 219
-
9.jpeg158.7 KB · Views: 215
-
10.jpeg154.6 KB · Views: 358
Last edited: