Stern DMD problem

[robertlucas1970]

Thought would see if this if fixable in any way
The DMD on Elvis tests good on the test, it all looks fine, but in gameplay and when I got into the menu there seem to bits which are not lit or not as bright as other bits.
The game has been on for a few hours and the menu looks better with just a few bits not up-to full brightness.
I have have removed all cables and put them back, I have all the correct voltage coming out the powder display board 12v, 5v and 68v
Is this how a DMD can start to fail or is there a capacitor someplace that needs to be changed, I only ask that as time and heat is making the display a bit better, from cold it will be a lot worse.

Many Thanks

 

[Hullshark]

ColorDMD Replacement Display for Elvis Pinball Machine

shop.colordmd.com

 

[CHRIS B PINBALLS]

Sounds like it’s gassed out

 

[Kenny Taylor]

I have a Stern DMD from my Ripleys that I can sell you. 60quid ?

 

[Pick Holder]

The DMD is knackered.
Swap it out.

 

[robertlucas1970]

Thanks for all the info, just wanted to make sure it was not a simple fix before I get a replacement..........

 

[robertlucas1970]

http://[URL]http://shop.colordmd.com/colordmd-replacement-display-for-elvis-pinball-machine/

[/URL]

Thanks, but not really a fan of the colour DMD, I know I must be the only one not to like them.
To me these games are retro and the DMD looks good, I just like to fit a red filter, I had a iron man wit a LCD display and did not like it.