What's new
By:
Pinball info

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

Stern Decals TWD

  • Thread starter Thread starter robertlucas1970
  • Start date Start date
R

robertlucas1970

I picked up TWD yesterday, it's very nice, but I want it perfect.
Has a few scuffs only on the back box so going to get some decals.
Are replacements laser cut to fit or do you have to trim the edge which I guess means you have to remove the T Molding.
Any tips for this job ?
Also best place to get some ? I see Retro has the full kit, but only need the back box ones.
Or I have found Stern ones from Pinball Life at $40 a side
Many Thanks
 
Which version of TWD did you get? Theres three different versions of cab art

Sounds like Pinballlife is the best bet.
Ask Phil at Pinball heaven as he may be able to get them for you
 
robertlucas1970 said:
I picked up TWD yesterday, it's very nice, but I want it perfect.
Has a few scuffs only on the back box so going to get some decals.
Are replacements laser cut to fit or do you have to trim the edge which I guess means you have to remove the T Molding.
Any tips for this job ?
Also best place to get some ? I see Retro has the full kit, but only need the back box ones.
Or I have found Stern ones from Pinball Life at $40 a side
Many Thanks
Click to expand...

It's a metal backbox and id the easiest re-decal in the world, check for nothing underneath the decals (look for any raised areas where dirt may be, Stern aren't the most careful) then peel off carefully.

If you had no dirt and you did it right, you will have a smooth slightly sticky surface - just put the new decal straight on (they are cut to size)

If there are raised bits underneath, you'll need to remove all the sticky stuff first
 
Vimtoman said:
Which version of TWD did you get? Theres three different versions of cab art

Sounds like Pinballlife is the best bet.
Ask Phil at Pinball heaven as he may be able to get them for you
Click to expand...
Hi only the Pro which Im glad I went for as don't think the LE is worth all that extra.
I'm going to do the powder coating on it and just want it all perfect.
IMG20210903102519.jpg
 
mufcmufc said:
It's a metal backbox and id the easiest re-decal in the world, check for nothing underneath the decals (look for any raised areas where dirt may be, Stern aren't the most careful) then peel off carefully.

If you had no dirt and you did it right, you will have a smooth slightly sticky surface - just put the new decal straight on (they are cut to size)

If there are raised bits underneath, you'll need to remove all the sticky stuff first
Click to expand...
Great stuff, sounds pretty easy :)
I will get them ordered as they will take some time from over the pond.
Many Thanks
 
CHRIS B PINBALLS said:
The shipping won’t be cheaper than Marco though
Click to expand...
$33, not sure what Marco would of been, Marco did dot have the well walker dacal that goes round the base, that's pretty worn so needed that one. Pinball life had everything, so it's on the way now.
 
You must log in or register to reply here.
Back
Top Bottom