What's new
Pinball info

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

In Progress Star Trek: The New Regeneration

s000m

Site Supporter
Joined
Apr 12, 2021
Messages
3,889
Location
Swindon
Ant offered me a project Star Trek: The Next Generation. I couldn't resist.

Game is definitely a project.

All ramps are cracked, playfield has severe blistering on the inserts and has severe wear on the playfield holes.

Cabinet is OK, but has suffered some severe damage from bent playfield supports. You couldn't even lift the playfield they were that bent!

PXL_20250910_153934051.webp

PXL_20250910_153847166.webp

PXL_20250910_153930120.webp

PXL_20250910_153955781.webp

PXL_20250910_153958282.webp

PXL_20250910_154011439.webp

PXL_20250910_153938536.webp

PXL_20250910_154219974.webp

PXL_20250910_153843366.webp

PXL_20250910_153909998.webp
 
New playfield arrived.

PXL_20250911_204514974.webp

PXL_20250911_195927971.webp

Stripped down the original playfield topside.

PXL_20250910_183802517.webp

Transferred over to the work horse.

PXL_20250911_191827044.webp


Already done the T-nuts and migrated the lamp boards after cleaning them up.

PXL_20250912_132609538.webp

Next up I focused on the subway. It was a real mess. The subway was covered in ash.

PXL_20250912_160011154.webp

It cleaned up pretty well. Man it's quite a complicated mech.

PXL_20250912_185905224.webp

PXL_20250912_190311577.webp

PXL_20250912_191014402.webp


Tomorrow I'll focus more on stripping and cleaning.

PXL_20250912_191017944.webp
 
Having owned a Star Trek, that I fully stripped I would strongly recommend replacing all the opto with new ones and the cannon wire forms.

The opto can and do cause strange issues. After doing it properly the new owner had zero problems for many years, I got rid of it because I got sick of them 🤣 but I had them all fixed before hand

Good luck, star trek is one of the most complex and pain in the a### games I've worked on outside of the hobbit, which is heavier if that's even possible, it's so heavy with mechs it takes two hands to lift the playfield.
 
Yeah, I've got a whole host of parts arriving. Including auto eddy boards.

Just focusing on the bottom playfield removal so I can finish removal of the topside parts.

I also need a plastic set, most are broken but I can't find anyone with a full set in stock.

Check out the dirt on the top side plastics. This shot shows what it looked like before a clean.



PXL_20250911_192709884.webp

I'm undecided what I do with the metals. I may go for a powder coat.


PXL_20250911_195923479.webp

PXL_20250911_195918672.webp
 
Back
Top Bottom