Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
Every now and then I get a ball plunge straight into the rubber under the right ramp, the alignment looks so off centre. Noob question here, how do I adjust?
We all know the solution, which is very simple/basic: just get the shooter tip centered on the ball.
There are only 2 factors controlling this:
- Playfield position
- Shooter position
Is there any way to adjust the playfield position, in respect to the shooter? ->>> probably not or not easy
Therefore - adjust the shooter / shooter housing.
-- The housing is attached to the cabinet with 3 or 4 screws
---- just remove it completely, and see if there is any wiggle room to align the tip with the ball.
---- If there isn't any wiggle room ->> use a drill bit to make some in the direction you need to get the tip aligned properly
----- For clarification: widen the holes in the cabinet that the shooter housing attaches through
---- NOTE: the shooter housing will cover up the slight enlargement to your cabinet holes