What's new
By:
Pinball info

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

Complete Sample Indiana Jones

Alpha1

Alpha1

Site Supporter
10 Years
Joined
Aug 11, 2011
Messages
2,280
Location
Southampton, UK
Thought I would put my thread up here that's been on UKVAC for the last 8 years... It won't have as much text and will be more picture orientated.

I found this in an Operators warehouse and quickly gobbled them all up with a fellow collector.

I started restoring the Indiana Jones in August 2012... and it's now hopefully only a month or so away from being completed. This will fast track the work I have done to it.

To cut a long story short I only found out it was a sample after Matt Adams told me it was, as he restored the playfield and noticed the different inserts.

1598794350442.png
 
The initial assessment of the PCBs and the playfield again didn't instill to much confidence. Loads of stuff missing!

1598794521025.png

1598794539314.png

1598794568626.png

1598794578147.png

1598794595981.png

1598794607275.png

1598794629007.png
 
So apart from missing PCBs, the biggest issue is lots of missing playfield parts! This game has been used to repair others!

I use my normal Operator channels and find an Op with a few playfields..

1598794940892.png

TADA!

1598794955213.png


He wants CRAZY money though! And the playfield is worn between the flipper area..

However it was only crazy money if I wanted the playfield! (no idea why...) So he strips it for me and I get all the parts top and bottom side for CHEAP!

1598794989843.png

1598795029439.png
 
Whilst I am waiting for the parts to arrive I look for cabinet artwork.

There's a ton of CRAP artwork on the market so I make sure I get the proper good stuff.

1598795106554.png
 
I get introduced to Matt Adams and the beginning of a beautiful friendship occurs with our mutual love of RoadShow. He offers to do the playfield for me so I drop it round with all the additional parts from the stripped playfield.

He also happened to have a complete unbroken plane so I buy that off him and I now have all the bits!

1598795393303.png
 
Manny continues with the cabinet. I ask Manny to track the original braiding so when the new braiding is installed it follows the way it was installed at the factory. He also applies a biscuit fix to the hole in the side.

1598795466730.png

1598795475431.png

I go with a two-tone inside finish. Yellow and black.

1598795517040.png

1598795539722.png
 
As the game is a 3 coin door version and also has this on the serial sticker as '3 slot', I didn't want to change the coin door. Instead it gets mirror polish chromed

1598796397396.png

1598796409324.png

1598796419100.png

1598796435676.png

And I get a NOS gun handle from PH
1598796456329.png

and metal parts for the playfield get tumbled and polished
1598796509361.png
 
And that is as far as I got - November 2013.

I needed PCBs and wanted nice originals, and I was unprepared to pay £1500+ to get them.

So I went on Operator raids, and over the next 7 years finally amassed a load of WPC PCBs for it by basically clearing out warehouses.

And as of this month, I sent the machine with the PCBs to Keith @ New Forest Pinball to install and most likely fix the PCBs and finish the game off.

As it's been so long I had also grabbed a few other bits. A Pin2DMD, and upgraded speaker system and I thought it best to rerubber the game with Titans and Superbands.

Hopefully it will be working and i'll have pictures in the next month or so.
 
You must log in or register to reply here.
Back
Top Bottom