Revenge from Mars in Wickford, Essex. Running on Pinbox with a 22" LCD monitor. myPinballs saucer mod installed with the new metallic grey saucers, also modded with light tubes to enhance the effect. Martian eyes mod done. LED tube in backbox. Cabinet would benefit from new decals. Good playfield, it does have a spot of damage below the flippers from a screw from underneath. No faults but martians get a bit stuck in play (they go up and down in the solenoid test but get stuck up in play and just judder a bit). Glass is unfortunately scratched up in the reflective area but you honestly hardly notice it when playing. I can include a piece of plain glass and some reflective film which I was going to try but never got round to. The "always broken" plastic is broken (surprise!) and a small one at the top left has been home-repro'd by a previous owner. Cliffy fitted but it isn't the ultra thin type and it is sitting a bit proud causing balls to skip a bit. Due to the way the machine has been wired up, it needs to be switched on and off at the wall. Ask me about anything I might have forgotten!
Last edited:
