Relay rating please?

[deathrow]

Black knight driver board.

The relay shown in the board above is missing its cover on my machine.

Is this the 6vdc?
Can anyone tell me what should be fitted here please? A link to an economically priced replacement would be perfect!

Thankyou

PS: I have checked the manual but it’s just called the ‘relay solenoid’ and not further information given

 

[pinballmania]

https://eu.mouser.com/ProductDetail...Safety/MY4-02-DC6?qs=Qs5cJLxP1YAHqxrFr25TwQ==

I think.

 

[deathrow]

My thought too but I’m not 100% ?

 

[Jay Walker]

The relay winding is controlled directly from the TTL gating logic, so it's a low voltage, AIR the parts drawing/Bill of Material for the pcb specifies 6v dc, with 4-pole switching. I may have the later equivalent from a System 11 board somewhere around, though it has an opaque yellow casing

 

[deathrow]

The relay winding is controlled from the TTL gating logic, so it's a low voltage, AIR the parts drawing/Bill of Material for the pcb specifies 6v dc, with 4-pole switching. I may have the later equivalent from a System 11 board somewhere around, though it has an opaque yellow casing

Great! Please let me know ?

 

[deathrow]

Anyone have one on a board they can check?

 

[deathrow]

Anyone?

 

[deathrow]

Bought, 7.89usd shipped