Question for the electronics experts

[RudeDogg1]

Does anyone know what the voltage is that goes to the 2 coffin lock lights on bsd? Got an idea which will hopefully use the existing connector

 

[Jonwolf]

When I replaced the coffin lights I just used the existing sockets and used standard LEDs. I guess the voltage is the normal 6v for each bulb?


Sent from my iPad using Tapatalk

 

[RudeDogg1]

When I replaced the coffin lights I just used the existing sockets and used standard LEDs. I guess the voltage is the normal 6v for each bulb?


Sent from my iPad using Tapatalk

I suppose aslong as there is a resistor on each it should be ok

 

[Jonwolf]

Depends what your idea is !


Sent from my iPad using Tapatalk

 

[RudeDogg1]

There is a model lighting comp that does the lil flickering torches [emoji6]

 

[Jay Walker]

Hi,

The lamps used in the lamp matrix are the standard pinball 6.3v bulbs, but the power supplied for the lamp matrix is three times that, app. 18v.

 

[RudeDogg1]

.....

 

[Jay Walker]

220 would be Red (2), Red (2nd 2), Brown (1 zero, i.e x10), then a tolerance colour, (silver, gold)