What's new
Pinball info

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

Question for owners of The Shadow

kevlar

Site Supporter
10 Years
Joined
Apr 11, 2013
Messages
6,815
Location
Newport, South Wales
The photo below shows the back wall of my playfield, you can see that the hinged section that the battlefield attaches to isn't inline with the rest of the back wall. Can someone check if theirs is the same please?

From the image you would guess that my Battlefield isn't all the way down, I've tried to see what's holding it up but it looks correct, it has landed on top of the 2 posts that it rests on. I've removed the 2 posts to see if it could go lower and it looks like it can't, it would physically hit the plastics below if it were any lower.

I'm not overly concerned about it, its just that I hope to fit some of that brick effect dolls house stuff to that wall this week or next.

imageshack.us_a_img13_2918_shadowew.jpg
 
Pretty sure it should be level, trying to decide if the lower of the two brackets in your picture is bent downwards...!
 
Hi Kevlar,

Nope - mine is in line with the back wall.

From your photo (hard to tell 100%), it looks like the bracket that attaches the battlefield to the backboard is bent downwards. Give them a a straighten - that will sort it out.

Cheers
Geoff
 
Yep, that was it. I guess someone must have lifted or lowered the playfield with the battlefield up.

Thanks guys.
 
Just bend it back I expect someone did what I did on my first week if owning it and forgot to put the bf thumb screw back in when tipping the pf. So it ends up flapping back and getting jammed I nearly cried with fear lol
 
Back
Top Bottom