What's new
Pinball info

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

Power issue

Pinball Dad

Registered
Joined
Aug 1, 2024
Messages
2
Location
Siouthampton
Hi All,

I have a BOP which until the other day has been working well and nothing has changed electrically or environmentally. When I tried to switch it on the other day it was dead. I check and replaced the plug fuse which then blew the fuse on the voltage filter.

Am I right in assuming either the filter or the transformer are gone. If so, any suggestions as to testing which or both?

Many Thanks
 

Attachments

  • PXL_20240802_110936122.jpg
    PXL_20240802_110936122.jpg
    170.4 KB · Views: 12
Unlikely to be the transformer. Those line filters can go bad and short out. I’d replace that, they are much cheaper than a transformer
 
Back
Top Bottom