My Leathal Weapon 3 playfield is in really good condition apart from this damage below the flippers. Fortunately it's mostly on the black parts of the artwork. What is the best way to repair this kind of damage?
Last edited:
Pinball info
Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
Playfield repairs
- Thread starter Andypc
- Start date
Looks like posts have been screwed in.
Mask off the surrounding area,
If the damage needs building up, I would use low viscosity super glue to 'seal' the area -then use paint paint pens, then back to the superglue to protect and build up the area. Take your time and apply thinly with a pipette or put a small drop on the edge or a small cable tie, use tissue to remove excess.
Then sand with 1000, 1500, 2000 and 3000 sand paper.
Polish.
You could then also mylar over that area.
Wont be an invisible repair but it will be better than it is now.
Mask off the surrounding area,
If the damage needs building up, I would use low viscosity super glue to 'seal' the area -then use paint paint pens, then back to the superglue to protect and build up the area. Take your time and apply thinly with a pipette or put a small drop on the edge or a small cable tie, use tissue to remove excess.
Then sand with 1000, 1500, 2000 and 3000 sand paper.
Polish.
You could then also mylar over that area.
Wont be an invisible repair but it will be better than it is now.
OP
OP
Thanks that was great advice 
Really happy with how the repair turned out. It's barely noticeable in person.
Really happy with how the repair turned out. It's barely noticeable in person.
Looks good.
Also looks like Murtagh has gone fishing..
Also looks like Murtagh has gone fishing..
I thought he was having a leakLooks good.
Also looks like Murtagh has gone fishing..
