Pinsound 2.1 wiring info please!

[Paul]

Wanted to pick up a pinsound 2.1 harness for a Bally/williams WPC89 machine, however unfortunately it will take a while to get one here, and ideally need one for tomorrow, so I wondered if anyone knew the wiring for it at all please so I can knock one up myself?
I could connect via the ‘OEM’ wiring, but makes more sense to use proper 2.1 as it’s there.

I would take a look at the board myself, however it’s not with me until tomorrow, when I need to install it, and most of the pictures online don’t show the physical connections properly .
Any pointers appreciated!
Thanks!

 

[Paul]

Panic over... found the info in the depths of the pinsound site....



Taken from here : https://www.pinsound.org/pinsound-1-help/

 

[Monkeyboypaul]

Is it that simple? Cabinet speaker to C- & C+, etc...

Where can you buy 2.1 harnesses?

 

[Paul]

Is it that simple? Cabinet speaker to C- & C+, etc...

Where can you buy 2.1 harnesses?

PinSound Stereo 2.1 Wiring Kit For Bally/Williams/Sega/Stern

PinSound Stereo 2.1 Wiring Kit For Bally/Williams/Sega/Stern Stereo 2.1 wiring harness (right, left and center) Nylon cable ties User installation guide Genuine Molex™ and Trifurcon™ crimp for the lowest contact resistance Connect your PinSound board to your stock speakers in stereo 2.1! With...

retroarcadespecialists.co.uk

I have all the bits here to knock one up myself, however they arent too bad price wise!

 

[Monkeyboypaul]

PinSound Stereo 2.1 Wiring Kit For Bally/Williams/Sega/Stern

PinSound Stereo 2.1 Wiring Kit For Bally/Williams/Sega/Stern Stereo 2.1 wiring harness (right, left and center) Nylon cable ties User installation guide Genuine Molex™ and Trifurcon™ crimp for the lowest contact resistance Connect your PinSound board to your stock speakers in stereo 2.1! With...

retroarcadespecialists.co.uk

I have all the bits here to knock one up myself, however they arent too bad price wise!

perfect, thanks!

 

[Nutty]

This is my Pinsound with my home made wiring, looks different to your image ?? Sub - Left - Right

This

 

[Paul]

This is my Pinsound with my home made wiring, looks different to your image ?? Sub - Left - Right

This View attachment 256453

Nope - is the same. Cab-/Cab+/KEY/Left-/Left+/Right-/Right+

However you have the newer board - i have the original v1.3, so it's located in a slightly different location on the board..