Pinball engineer wrexham

[Jon Dodd]

Hi having a few problems with my judge dredd machine and do not have skill to fix so could do with some help. Please PM me if your interested.
Thanks Jon

Sent from my ANE-LX1 using Tapatalk

 

[Paul]

Anywhere near you @Poibug ??

Alternatively @PinballDaze ??

 

[Arv]

Lock down init

 

[Jon Dodd]

Yes true not sure where you stand with a pinball repair although I think you are allowed tradesmen in house

Sent from my ANE-LX1 using Tapatalk

 

[Jon Dodd]

Thanks for giving me lead i might have to wait a while. Machine turns on lights up then goes dark.

Sent from my ANE-LX1 using Tapatalk

 

[Arv]

Pics?

 

[Jon Dodd]

Hi machine lights up for 5 seconds bleeps then lights go out and constantly repeats same cycle over and over.
Thanks Jon


Sent from my ANE-LX1 using Tapatalk

 

[BigIan]

Your watchdog is resetting as your voltage is to low. Try reseating all the cables in the back box but it probably will need something replaced.. worth checking your power board is screwed in not just hanging on untightened screws

check on pinwiki

also this might tide you over until someone can come look at it for you

https://www.pinball.co.uk/spares-accessories/5v-reset-fix-pcb/

 

[CHRIS B PINBALLS]

Also give the big chip on cpu a good push home

 

[Jon Dodd]

Great will try thank you all [emoji106] [emoji106]

Sent from my ANE-LX1 using Tapatalk

 

[Jon Dodd]

Have done everything and it now says factory Settings restored / bookkeeping totals cleared.lights stay on all the time.
Should i still buy temp fix as recommended or wait for engineer.
Thanks Jon

Sent from my ANE-LX1 using Tapatalk

 

[Pick Holder]

I’m in Brum but cover your area.

I am working over Xmas and new year.