(my monitor or cacky socks are not included in the sale).
Collection from B30 post code area (social distancing applies!) - or I can courier for about £12.
This is a Lenovo PC with an Intel Core 2 Duo 2.93ghz processor and 2GB of ram, with a 32GB solid state drive.
The hard drive has 'Pinbox' installed.
Have had this machine knocking around for a while as it is my 'test' PC. It was also the one I set up to send to customers who previously had my conversions done in case they had issues. It has never been used so it is time to do some spring cleaning.
This will work on the 110v power supply within the Pinball 2000 machines.
WHAT YOU WILL NEED TO BUY ON TOP
- 20 inch 4:3 monitor (I prefer these as same aspect ratio and size as original). 22 inch better but harder to get. - (£40-80)
- Lepal 2:1 amplifier. (£20)
- Audio isolation transformer. (£10)
- Audio cables (£5)
- VGA cable (£5 if you dont have one)
In the past I have taken the yellow/black power supply cables out of the PC and use that to run the amplifier, but occasionally this does not work and you may have to fit an external 12v power supply.
You will also need to make a bracket for the monitor and do some messing about with the cabling. I also put in USB powered LEDs to replace the strip light behind the translite (£10 on ebay).
If you wish to run this with the existing monitor you will need a conversion card which is also avaliable online. I personally prefer putting in a flat screen.
Would also be more than happy to talk the buyer thru the installation on the phone.
This runs a lot quieter and more efficent than the original hardware and Jim's new software is amazing.
Can be used on Revenge from Mars or Star Wars Episode One.
Last edited: