I've been working through cleaning up and refurbing these machines and have hit a couple of issues.
Not sure what parts I need to order or who to get them from? If anyone has any, I’m going to be at SWL for the comp tomorrow so will happily buy off you there
Firstly on DE Robocop the end of the shooter eject mechanism that strikes the ball has snapped off, all the other mechs like this on the game have the metal a lot longer - the coil and sleeve seem fine so I think this is why the ball doesn’t eject into the shooter lane all the time - what do I need to order?
![3154FA62-79DB-4D44-A69F-1F95227573FD.jpeg 3154FA62-79DB-4D44-A69F-1F95227573FD.jpeg](https://www.pinballinfo.com/community/data/attachments/98/98545-3609a4cc1ceb60e936eb71773b0c61be.jpg)
Also if anyone has the ’spring’ that stops the ball settling on the pop bumper, that would be handy too (think it is for Simpsons originally) as it’ll probably work better than the bent paperclip I’m currently using,
![053A885E-D6A2-4B2E-8A33-CF1A11114A6F.jpeg 053A885E-D6A2-4B2E-8A33-CF1A11114A6F.jpeg](https://www.pinballinfo.com/community/data/attachments/98/98547-ec2a9ff95b9c1cdd130d183efa8863c7.jpg)
On Space Jam, it looks like the inner panel the shooter rod mechanism screws into to has been changed, or if it is original has warped. It is just a flat metal piece that doesn’t seem to really fit. I've changed the shooter rod and it doesn’t sit straight and fouls the auto plunger, so auto launches are an issue. Tried taking the plate out, hammering it flat again and adjusting the position but can’t get it to sit dead straight
![2B9DB057-4F2D-4C1D-9E7F-0E843C9BD383.jpeg 2B9DB057-4F2D-4C1D-9E7F-0E843C9BD383.jpeg](https://www.pinballinfo.com/community/data/attachments/98/98546-d221334b793ed1e4068bab4364c19ac0.jpg)
Thanks for any help or suggestion, I think I’m getting there with working on these machines but cant find these parts listed anywhere in the UK
Not sure what parts I need to order or who to get them from? If anyone has any, I’m going to be at SWL for the comp tomorrow so will happily buy off you there
Firstly on DE Robocop the end of the shooter eject mechanism that strikes the ball has snapped off, all the other mechs like this on the game have the metal a lot longer - the coil and sleeve seem fine so I think this is why the ball doesn’t eject into the shooter lane all the time - what do I need to order?
![3154FA62-79DB-4D44-A69F-1F95227573FD.jpeg 3154FA62-79DB-4D44-A69F-1F95227573FD.jpeg](https://www.pinballinfo.com/community/data/attachments/98/98545-3609a4cc1ceb60e936eb71773b0c61be.jpg)
Also if anyone has the ’spring’ that stops the ball settling on the pop bumper, that would be handy too (think it is for Simpsons originally) as it’ll probably work better than the bent paperclip I’m currently using,
![053A885E-D6A2-4B2E-8A33-CF1A11114A6F.jpeg 053A885E-D6A2-4B2E-8A33-CF1A11114A6F.jpeg](https://www.pinballinfo.com/community/data/attachments/98/98547-ec2a9ff95b9c1cdd130d183efa8863c7.jpg)
On Space Jam, it looks like the inner panel the shooter rod mechanism screws into to has been changed, or if it is original has warped. It is just a flat metal piece that doesn’t seem to really fit. I've changed the shooter rod and it doesn’t sit straight and fouls the auto plunger, so auto launches are an issue. Tried taking the plate out, hammering it flat again and adjusting the position but can’t get it to sit dead straight
![2B9DB057-4F2D-4C1D-9E7F-0E843C9BD383.jpeg 2B9DB057-4F2D-4C1D-9E7F-0E843C9BD383.jpeg](https://www.pinballinfo.com/community/data/attachments/98/98546-d221334b793ed1e4068bab4364c19ac0.jpg)
Thanks for any help or suggestion, I think I’m getting there with working on these machines but cant find these parts listed anywhere in the UK