Wanted Parts: bumper post, t-nut

[Shark]

this bit broke off a pop bumper post on Freddy..

the post appears to be 55mm long with a fixed nut at the top. i also need a t-nut.


thank you in advance for looking in your box of spares!

 

[Shark]

thank you to replicas for sending me a part, however it is a fraction too large.

still looking.

please advise where to buy parts like this?

 

[Moonraker]

please advise where to buy parts like this?

You could try direct from Gottlieb part suppliers -http://www.pbresource.com/

 

[Sgt GrizZ]

Good luck ordering from PBR

Easier to put a shout out on RGP

What was too large .....the Tnut or post ????

 

[Lippy427]

You could try dropping Andy/PinballMania a mail
I can T-Nuts listed on this page http://www.pinballmania.co.uk/nutsandbolts.htm
but can only find the bolt / post on the long parts list page http://www.pinballmania.co.uk/partslist.htm.

Failing that I'd try Parts4Pinballs e.g. http://www.parts4pinballs.com/product_info.php?products_id=4048

Cheers
Geoff

 

[Shark]

thanks grizz. it was the diameter of the metal post too big for the red plastic bit. replicas to the rescue again with an offer of a replacement red plastic bit that will fit the new metal post.

thank you for those links geoff. bookmarked for future use.