P Roc issues

[SeikoKid]

P3 Roc V2

I have the following problem

The board will not boot on power up of TNA. I get the 2 blue leds above the power connection. When I remove the 5v supply to the board and refit the board then starts to work

Spooky said it would be a poor crimp connection on the power connector but it isn’t

I assume the board is struggling to boot , is that correct ? Guess i need a replacement unless this can be repaired ?

 

[SeikoKid]

I’ve also found that the ball save timer and multiplier boards are not working , sometimes they do then during a game they stop

 

[Fubar]

I’ve also found that the ball save timer and multiplier boards are not working , sometimes they do then during a game they stop

That's usually a bad connection on one of the crappy Dupont connectors they used for the lamps chain... Happens on mine too.

 

[SeikoKid]

ive checked those and it isn't them sadly