Wanted Old Stern sound board to mpu ribbon cable

[PUP]

As per title for a 9 ball which I have recently resurrected. I see great plaines electronics in the US have them but are there no UK stockists or anyone here with a spare pair?
Im wanting to rebuild the flippers also as they are very worn, again does anyone over here stock old stern flipper parts?
Also looking for replacement slingshot plastics.
Any help appreciated.
Cheers, Andy

 

[cooldan]

Post up some pictures mate, I’ve got a bagful of plungers, links, pawls, springs, sleeves and bushings. Maybe in there we can fix you up.

I’ve got some old cables as well so the more pics the better chance you got

 

[Asiapinball]

2.54mm 0.1" Pitch 16-pin Jumper Cable - 20cm long - The Pi Hut https://share.google/NLSq3CTJPqosGVQTB

Andy I believe you can use 2x 16 pin 0.100" ribbon cables. Pins 33 and 34 are not used.

 

[lukewells]

Great Plains electronics shut down a long time ago.

CPR has full plastics sets

Pinball Life in the US makes the flipper rebuilds for those (though I think you can also get them via Pinball Mania, Pinball Heaven, or 1st Stop pinball if you ask them to order them in for you)

 

[Asiapinball]

Stern SB-300 - Pinball Electronics from barakandl https://share.google/wQBHCgBFXp6yr8g7t

Info on ribbon cables. Not sure if the ones I found are long enough so do check.

 

[new forest pinball]

Morning Andy,
Probably got all you need in stock, but I am out on site visits today so if you can wait until my return tonight, my friend, I will let you know what we got….. K.

 

[David_Vi]

If you can't get a ribbon you can make it out of a molex 0.1 housings and normal wire. I did this for Seawitch and it's worked great.

 

[Jay Walker]

With the leads for the Audio board;

As David Vi mentions, there's no barrier to making up an alternative. Stern did do that early on, before moving to use ribbon cables. Mpu 100 games like Wild Fyre had two separate molex to molex wire bundles, with the wires alternating Red then Yellow.

 

[PUP]

Thanks for replies, iv attached a sone pics of the ribbon cables and the flippers used, they need a full proper rebuild really, only the coils are good. Good to know I could make a replacement if all else fails but would be much easier to buy & replace if either of you have @cooldan @new forest pinball
Cheers. Andy

 

[PUP]

Pics

 

[new forest pinball]

We got the flipper rebuild kits. But cannot seem to find the new cable sets I have. Will have another look tomorrow.
All I can find is an old used one. D.M. Me Andy if any use. K.

 

[cooldan]

Sorry matey, my spare ribbons are all much narrower and double-decker at the ends

 

[PUP]

Sorry matey, my spare ribbons are all much narrower and double-decker at the ends

No worries buddy. PS Paul Garner has your Paragon backglass to bring down to Swavesey for you

 

[Arv]

Is he bringing The Hobbit translite also Andy?

 

[PUP]

Is he bringing The Hobbit translite also Andy?

Yes he is i was going to message you

 

[replicas]

Look forward to seeing this Nine Ball all done and ready to play. Great fun machine.