Anyone that’s been reading my Data East Star Wars shop log will know I’ve put a lot of time and effort in to getting it to look quiet nice and I’m on the last leg and on my last legs!
I just received Color DMD today. Instructions say put the power tap in to CN6 of Power Supply Board. 15 pins. Keyed, so it will only go in one way. Only the key’s in the wrong fluffing pin. It’s pin 2 of the power tap but pin 4 of CN6 of power supply. Anyone had similar issues?
There’s no wiring diagram with the Color DMD so I don’t know if it’s safe to just remove the key. The tracks from pins to power tap connector seem to be coming from pin 4 (which is the key on power supply), pin 8 which is 5 volts and pin 13 which is GND on power supply.
I really wanted to hook the thing up tonight but looks like I’ll have to wait until I can get in touch with Pinball Palace who I got it from tomorrow unless someone on here, has come across the same issue and can advise.
Cheers
Andy
I just received Color DMD today. Instructions say put the power tap in to CN6 of Power Supply Board. 15 pins. Keyed, so it will only go in one way. Only the key’s in the wrong fluffing pin. It’s pin 2 of the power tap but pin 4 of CN6 of power supply. Anyone had similar issues?
There’s no wiring diagram with the Color DMD so I don’t know if it’s safe to just remove the key. The tracks from pins to power tap connector seem to be coming from pin 4 (which is the key on power supply), pin 8 which is 5 volts and pin 13 which is GND on power supply.
I really wanted to hook the thing up tonight but looks like I’ll have to wait until I can get in touch with Pinball Palace who I got it from tomorrow unless someone on here, has come across the same issue and can advise.
Cheers
Andy