What's new
By:
Pinball info

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

Node Board 9 Issues

So just to clarify you had a faulty node board, replaced it with another node board which turned out to be faulty, and finally got a third one which worked?

I bought a spare recently on here to keep handy but haven't tried it. Making me a little nervous if there's a bad batch of them.
 
Marvello said:
So just to clarify you had a faulty node board, replaced it with another node board which turned out to be faulty, and finally got a third one which worked?

I bought a spare recently on here to keep handy but haven't tried it. Making me a little nervous if there's a bad batch of them.
Click to expand...
Your node board is the newer version which I sent todler this last time and that works which is great. So you shouldn’t have any problem

Both node boards I’ve sent todler came from pinballife which basically they say come tested working and due to the nature of the boards offer no warranty once fitted which isn’t great but I get why in case the fault that blew the first board isn’t rectified and then on to blow the second
 
Silverpaolo said:
Your node board is the newer version which I sent todler this last time and that works which is great. So you shouldn’t have any problem

Both node boards I’ve sent todler came from pinballife which basically they say come tested working and due to the nature of the boards offer no warranty once fitted which isn’t great but I get why in case the fault that blew the first board isn’t rectified and then on to blow the second
Click to expand...
Stern also said there was a batch not programmed correctly so after the distributor tested them they “lost” the program (or something like that). Again no warranty and how do you prove? I will go back and let them know another board works correctly.
 
Thanks to the original poster for this thread :thumbs:

I'm also having a node 9 board issue on my IM. Does anyone know if replacements are readily available in the UK? Cheers.
 
These should all get to you within a week.

retroarcadespecialists.co.uk

Stern SPIKE & SPIKE 2 Node Board - 520-7017-72

Stern SPIKE and SPIKE 2 node board. Replaces 520-6985-72. Stern #520-7017-72,199-7017-00A. PLEASE READ: If your machine's node board is not working, be sure to fix the issue that caused your node board to fail before installing a replacement, or the newly installed node board will immediately...
retroarcadespecialists.co.uk retroarcadespecialists.co.uk

www.pinball.co.uk

520-7017-72 Stern Node Board (520-6985-72) - Pinball Heaven

Stern Pinball node board PCB 520-7017-72
www.pinball.co.uk www.pinball.co.uk

www.pinballlife.com

Stern SPIKE & SPIKE 2 Node Board - 520-7017-72

Stern SPIKE & SPIKE 2 Node Board for replacement with Stern #520-7017-72. Ensure machine's issues are fixed before installation.
www.pinballlife.com
 
thewool said:
Thanks to the original poster for this thread :thumbs:

I'm also having a node 9 board issue on my IM. Does anyone know if replacements are readily available in the UK? Cheers.
Click to expand...
Pinball heaven normally have some, retro might. Check that it's not a pin issue first. Is it showing undetected
 
thewool said:
Thanks to the original poster for this thread :thumbs:

I'm also having a node 9 board issue on my IM. Does anyone know if replacements are readily available in the UK? Cheers.
Click to expand...

If red light on only (green light and yellow light off) i can repair. Cheaper than a new one
 
You must log in or register to reply here.
Back
Top Bottom