Sold No Fear - £2300

[Dave Bishop]

Williams No Fear

this was at @Julian place until a few weeks ago. It’s been taken back by owner and is currently being shopped.

Good bits
Playfield in good condition with a small amount of wear at the NO FEAR insert on the edge

All flipper mechs rebuilt, ramps polished, cabinet inside cleaned.

Bad Bits
It has the usual cabinet fade,
Translite on the right edge has artwork missing.
The Driver board has a hack on it.

ideal for a first pin, is mechanically sound.

Pictures to follow
Update: round buddy’s for football and seen the game..
currently in stripped condition

 

[Dave Bishop]

Translite

 

[jonathaniancarlin]

Where are you based please?

 

[BigIan]

Where are you based please?

Kent

 

[Dave Bishop]

Yup. , what Ian said, south East London - Sidcup Kent

 

[jonathaniancarlin]

Thanks, a little far for me unfortunately. Good luck with the sale.

 

[BigIan]

Thanks, a little far for me unfortunately. Good luck with the sale.

Get Martin to bring it up to if Dave can get it on a pallet get it shipped up by a haulage co..

 

[jonathaniancarlin]

Get Martin to bring it up to if Dave can get it on a pallet get it shipped up by a haulage co..

Relatively new to the forum and I see Martin’s name thrown around a lot without actually knowing the guy. Is there something I’m missing?
I’d like to see it myself in person too.

 

[paddythegreek]

Relatively new to the forum and I see Martin’s name thrown around a lot without actually knowing the guy. Is there something I’m missing?
I’d like to see it myself in person too.

Martin is the guy most of us use to collect/deliver our pins. He’s been doing it years and takes care of your pin whilst in his care.
@Dave Bishop has been a member since this group started so the machine will be as described. Buy with confidence, this ain’t eBay

 

[Gonzo]

Martin is the guy most of us use to collect/deliver our pins. He’s been doing it years and takes care of your pin whilst in his care.
@Dave Bishop has been a member since this group started so the machine will be as described. Buy with confidence, this ain’t eBay

I'll second that

 

[County1883]

Martin is a stand up guy! Looks after your pin and delivers when he says he will

Buy with confidence on here

 

[AlanJ]

Or, go see it, play it, if happy buy it and take it home (make sure it will fit in your vehicle), but in all honesty, unless it’s nearby to you, Martin will be cheaper and easier.

 

[Fubar]

The difference is, if you use Martin, you might not get the game for weeks. Going yourself means you might have it home for the weekend

 

[AlanJ]

true

 

[Dave Bishop]

Martin is the guy most of us use to collect/deliver our pins. He’s been doing it years and takes care of your pin whilst in his care.
@Dave Bishop has been a member since this group started so the machine will be as described. Buy with confidence, this ain’t eBay

Thanks @paddythegreek. Had a lot of interest in the game via PM already.

when the game is reassembled I will post and first member to come up with the ££ gets it.

 

[Pick Holder]

What’s the ramp like ?

 

[Dave Bishop]

Good question - now it’s apart I will ask for some. I think it does have a crack where it is above the magnet coils..

Will find out and post some pictures

 

[Pick Holder]

They crack bad around the third flipper.

I love No Fear.

Poops over LZ.

 

[Beowulfz07]

They crack bad around the third flipper.

I love No Fear.

Poops over LZ.

Fortunately I have a brand new ramp and support when I finally get round to doing mine

 

[Dave Bishop]

Starship in US does them

 

[handbaked]

Hi. I am in Swanley and am interested. Let me know of still available please. Thanks.

 

[Dave Bishop]

Pics of machine will be up this week

 

[Dave Bishop]

So No Fear is finished

 

[Dave Bishop]

Bump.
A very tidy No Fear.
The cabinet has fade, but playfield is excellent and game metal work polished, all mechs rebuilt/cleaned with new coil sleeves.

the plastic ramps have couple of cracks, but still strong. any specific pictures just ask

 

[Pooman2084]

No Fear is a great game, I really miss mine.
GLWTS.

 

[Dave Bishop]

Bump.

 

[kev a]

Dropped you a pm about the possibility of pallet shipping

 

[Dave Bishop]

Sale Pending.. if it doesn’t work out will be back up..

 

[Djrouge]

Oh wow, what can I say...
All the Chrome parts were mirror like, the ramps were exactly as described apart from the fact that they'd been cleaned up to look brand new. Even the chrome on the underside of the playfield were mirror like! As were the legs, inside and out.

Can't tell you how happy I am with this purchase, I was expecting a bit of a project for my first pin but apart from the cabinet fade there's nothing to do.

@Dave Bishop -Thanks for your help.
I spent a couple of hours with the owner (who doesn't do forums) and played some of his pins, I would buy any pin from him even without looking at it, you can buy with confidence. He's one of the nicest guys I've met and he didn't do me a discount to say that His attention to detail is mind blowing and he won't have cut any corners on anything that's for sure.