Hi is there an alternative to goo gone that i can use to remove mylar glue?
Pinball info
Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
Mylar removal
- Thread starter Pudsey pinball
- Start date
I've always used Sticky Stuff remover and find it better than Goo Gone as it doesn't leave any residue:
http://www.ebay.co.uk/itm/like/1712...ff3=1&ff11=ICEP3.0.0&ff12=67&ff13=80&ff14=108
You can buy it in B&Q off the shelf.
http://www.ebay.co.uk/itm/like/1712...ff3=1&ff11=ICEP3.0.0&ff12=67&ff13=80&ff14=108
You can buy it in B&Q off the shelf.
OP
OP
Nice one cheers Steve.
Another thumbs up for Sticky Stuff Remover. Also available from B&Q
The technique I used (which I first heard of from Pinside) was to spread the stuff all over the glue, then wait 5 mins for it to dissolve the glue.
After that, scrape up what you can (using an old credit card or similar), then sprinkle a small amount of flour over it.
Push the flour around with your finger and it soaks up the glue and remover. Works like magic. Will always use this technique from now on
The technique I used (which I first heard of from Pinside) was to spread the stuff all over the glue, then wait 5 mins for it to dissolve the glue.
After that, scrape up what you can (using an old credit card or similar), then sprinkle a small amount of flour over it.
Push the flour around with your finger and it soaks up the glue and remover. Works like magic. Will always use this technique from now on
Maplin have label remover. Guess it's a similar stuff!
I used evostick adhesive cleaner
OP
OP
I went and got some sticky stuff remover it's working,I've done a complete pf lower and upper Mylar strip on a system11 game ........ Very tricky
Flour isn't just for baking cake!
Plain or self raising?
OP
OP
Ive used white powder before
So that's where all your cocaine has been going.
OP
OP
New top tip if you want a nice shiney pf use cocaine!!....... That why i do my machines so fast!!!!!!!!!!
OP
OP
Looks like Pablo Escobar has been on that one
What a difference. Nice work there Dave.
That white stuff certainly does the job.
That white stuff certainly does the job.
That's come up lovely
OP
OP
It has a few raised inserts to sort that I could of done properly with Mylar on,lost a bit of insert decal on a few but not drastic will sort that later once the whole thing has been striped and polished.
Did you use freeze spray?
OP
OP
Yep
Don't think I've got the balls to try anything like that yet, or a machine with Mylar on it 
OP
OP
Must admit Carl ya need a big pair of cojones coz once you commit to it there's no going back!!
